• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Supertrickler? Good bad and ugly?

No. All you have to do is follow the programming instructions. Scales (like mine) that were set up for autotricklers need to be factory reset and then programmed for the ST. It all in the manual.
Perfect. Thanks.

Order placed...
 
Last edited:
it will do so to within .02+/- about every 10 seconds, or better. you are, of course, limited by the electronic scale, as its still electronic, not mechanical. Slow it down to 20 secs and it should hit 90% of the charges to the kernal. Even for my 1,000 yard palma ammo, I am not going to toss out a charge that is off by a kernal of powder (.02gr). Its not going to show on the target.
So , if ur loading ur 1000 yd. Palma ammo do u use the V4 or the Prometheus?
 
So , if ur loading ur 1000 yd. Palma ammo do u use the V4 or the Prometheus?
I use both the SuperTrickler and the Prometheus. Got the Pro set up on a Dillon 550 and its currently running 308. The ST has been loading 223 ammo palma ammo....85.5s and 90vlds.
 
Who has the scoop on using a battery for Mr. Coffee and the FX120I? I'm on pre-order so I have time, but it would be nice to get my ducks in a row. This is simple with my Chargemaster, but now I'll be powering up a FX120I and Mr. Coffee. 12VDC? Something else? Thanks.
 
Flash Fish I have two. One is the 300w the other is 200w. Look on Amazon
Bart are you plugging into the AC outlet on the flash fish box or the 12v 2a plug? I see they have two outlets, are you using both boxes at a time or use one then use the other when it get weak?
 
You don't NEED to buy the scale from Supertrickler. The AnD scale that I had took me about 3 minutes to reset and get it set to the ST. (Follow instructions)

When I reload in the field I used a deep cycle 12V car battery with my V4. I have to try it with the ST and I am sure it will work.

As with anything else, ou will go through a learning cycle. Don't make your own instructions, follow theirs and you will do fine.
 
Got my ST a couple days ago. I already had the scale so my ST had to be programmed to communicate with the scale. It’s not plug and play. There are a dozen or so steps to make it communicate. My advice is to read through the 83 page instructions which are only online. Get a feel for it. Then go through the steps carefully and pay more attention to the result than the number of button pushes. One mistake I made was to have the scale and the ST both plugged in. The scale gets its power from the ST. Once it was successfully communicating it was pretty easy menu driven and I was dropping powder charges. My overall experience is that it’s fast and accurate and I’m gonna love it. It’s a great product!
 
Any of you guys know if the scale and/or Supertrickler come with a check weight? Mine is due to ship here in a couple weeks.
 
Any of you guys know if the scale and/or Supertrickler come with a check weight? Mine is due to ship here in a couple weeks.
In my GEN 1 and 2 no check weight with the ST only. Neither came with one, bought the trickler only both times…. if you buy both, (scale and trickler) maybe they will add one to the kit.
 
I get the impression from the Facebook group that if you order the scale with the trickler it takes your total above a certain amount and you may have to pay import duties. Something to be aware of or look into.
I bought both together and I had to send in a check to UPS for a $3.00 import charge. For me it didn't break the bank.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,244
Messages
2,214,716
Members
79,488
Latest member
Andrew Martin
Back
Top