Stuck case, PLEASE HELP!

[Old Navy]

I used a 1/4-28 starter tap with the #7 bit. This is the correct way to get it out. You will need to polish the brass out of the die. Off course if you are a Millwright, and just can't resist beating the hell out of your precision die and press, use a big hammer. Later! Frank

 

[mr45man]

I would try some "Kroil first, just might loosen it up a bit.
John H.

 

[rogn]

Make sure to put a bit of lube on the "puller" bolt threads, dont want to have to start twice.

 

[brxbrad]

I cant believe this thread is still alive..... Maybe this will help.......

http://www.metacafe.com/watch/2230812/stuck_case_removal/
While you may never get a case stuck inside a reloading die, it’s nice to know that MidwayUSA can help. In this commercial Larry Potterfield demonstrates the process for removing a stuck case using a RCBS Stuck Case Remover

http://www.midwayusa.com/product/504741/rcbs-stuck-case-remover
Order it. Use it. Need it again. You have it. $16.49 plus S/H

 

[BigDMT]

I think I've heard every method and suggestion repeated 3 times so far... :