Stuck case help

[Big Mc]

I have used the vice-grip method, and it worked for me also . The die body is so hard you can,t hurt it with hand tools.. My two cents.. Tommy Mc..

 

[LKEYES]

Yeah I did clean the die out and made sure there was nothing left inside of it.
Seams to be working good again now.

 

[D2x shooter]

Use the RCBS stuck case remover. To make things easier take the die out of your press and reinsert it from below the press top. That way you are looking at the stuck case from the top of the press. It is much easier to drill and tap the case and remove it. Once the case is out put the die back in the press and resume loading.

Good luck