Stolle Big bore Panda question

[Hengehold]

one of my “bucket list” guns is a Big Bore Panda Palma Rifle. With my typical LOP I need the rear iris located directly above the trigger. Can someone take a pic with a Warner rear sight mounted as far forward as possible so I can see where the rear iris will end up in relation to the trigger?

Attached is a pic of what I am looking for with a big bore panda.

Thanks,
-T

 

[expiper]

send your pics to Kelblys ,,,,,they do this on a daily basis,,,,Roger
https://www.kelbly.com/actions-aluminum-bigbore-panda.html

 

[mgdietrich]

Trevor:

First pic is as forward as I can get it with my scope rail on, iris his rail at current elevation. There is one more notch farther ahead. Second pic is how I run it.

Ahg trigger, if I build another one will use Bix n Andy, so action can take any Remington style and be more flexible.

We have this action as far back in the stock as possible, front of pistol grip is machined out for rear action screw (Panda has 3)

 

[Hengehold]

Trevor:

First pic is as forward as I can get it with my scope rail on, iris his rail at current elevation. There is one more notch farther ahead. Second pic is how I run it.

Ahg trigger, if I build another one will use Bix n Andy, so action can take any Remington style and be more flexible.

We have this action as far back in the stock as possible, front of pistol grip is machined out for rear action screw (Panda has 3)

Thanks. Looks like there is enough room to move the rear sight where I need it. Can you send a pic of the bottom of stock so I can see the action screw setup? I’m not excited about the idea of encroaching on the pistol grip. I have seen stocks break in that area on rare occasion.
-T

 

[mgdietrich]

It only is in about 1/4", nothingnto worry about. Same setup in same stock of a different rifle we didn't set it as far back. I prefer as far back as possible, but both work fine.