Stock ordering options?

[TrxR]

Looking for opinions on what to order for a McMillan benchrest stock. Shell construction Carbon or fiberglass? Fill:EDGE or Ehanced EDGE? Pillars , go with their 1/2" or they will drill to spec and go with 5/8 front and 9/16 rear?

Action is Borden BRM with the .250 recoil lug. Barrel is 23" from the recoil lug is 1.250 at the action and 1.00 at muzzle. Chambered in 30BR.

Not stuck in a weight class . I shoot in a couple of local clubs that have an open class 100yd for score matches once a month at each club.

Thanks

 

[rjtfroggy]

As I stated earlier I have two, one with the regular fill one with the light weight and to be honest I can't tell the difference in the bags on the bench.
Aside from the action type my rifles are the same size as yours. I had them install the pillars mainly because it was just easier than doing it myself.
With a little bit of work with fitting and polishing mine (less than a hour) I was up and running and very satisfied with results.
Like I said earlier the only bad part is the 6 month wait. I would buy again with out a second thought.

 

[GerryM]

wood works well too.