SELLING Steelman 2” Wide Rear Rudder

[TSteelman]

I have been selling these since 2021 through word of mouth, friends, and stock makers who have added these as a standard configuration. Never posted them on here, but it has come to my attention that someone is now copying my design and selling here, no better time than the present to offer my original design here on Accurate Shooter.

These are a standard drop in fit for Alex Wheeler’s original LRB stock design and rudder inlet (5” hole spacing). I know Ronnie Milford and Shannon Webb are also offering stocks with these installed as a standard offering.

I have 3 materials available:

Delrin - approx. 0.5 lbs - $100
Aluminum - approx. 1 lbs - $100
Stainless Steel - approx. 3 lbs - $140

$10 flat rate shipping on any QTY

Inventory update 4/26/26: I have several Delrin and Aluminum in stock. I am sold out of Stainless Steel and will likely not be restocking these in the near term due to cost and this being my least sold variant.

I have some more pics of these on guns I will add in subsequent posts as allowed. (Bump limit)

Thomas Steelman

 

[Jvance513]

+1 for Thomas’s rudders. I have 4 long range bench guns. 3 of them have Thomas’s rudder on them, and I’m quite literally having Shannon Webb do another stock for me just so all my guns can be the same and have 4” fronts and Steelman rudders on the back. I can’t say enough good things about them. Also a side note for anyone interested in a rudder, rear bags aren’t a big deal to get. Protektor regularly keeps a fair amount of these rear bags in stock now just for these rudders.

 

[6BRAckley]

Dealing with Thomas is A+

JP

 

[lawebb21]

I have them as well. +1 for steelman

 

[Jvance513]

.

 

[lsr48]

Dealing with Thomas is A+

JP

I'll take one delrin and one stainless steel. I will pm for detail.

 

[lsr48]

+1 for Thomas’s rudders. I have 4 long range bench guns. 3 of them have Thomas’s rudder on them, and I’m quite literally having Shannon Webb do another stock for me just so all my guns can be the same and have 4” fronts and Steelman rudders on the back. I can’t say enough good things about them. Also a side note for anyone interested in a rudder, rear bags aren’t a big deal to get. Protektor regularly keeps a fair amount of these rear bags in stock now just for these rudders.

+1 for Thomas’s rudders. I have 4 long range bench guns. 3 of them have Thomas’s rudder on them, and I’m quite literally having Shannon Webb do another stock for me just so all my guns can be the same and have 4” fronts and Steelman rudders on the back. I can’t say enough good things about them. Also a side note for anyone interested in a rudder, rear bags aren’t a big deal to get. Protektor regularly keeps a fair amount of these rear bags in stock now just for these rudders.

I have been selling these since 2021 through word of mouth, friends, and stock makers who have added these as a standard configuration. Never posted them on here, but it has come to my attention that someone is now copying my design and selling here, no better time than the present to offer my original design here on Accurate Shooter.

These are a standard drop in fit for Alex Wheeler’s original LRB stock design and rudder inlet (5” hole spacing). I know Ronnie Milford and Shannon Webb are also offering stocks with these installed as a standard offering.

I have 3 materials available:

Delrin - approx. 0.5 lbs - $100
Aluminum - approx. 1 lbs - $100
Stainless Steel - approx. 3 lbs - $140

$10 flat rate shipping on any QTY

I have a few Delrin in stock, several aluminum, and several stainless steel.

I have some more pics of these on guns I will add in subsequent posts as allowed. (Bump limit)

Thomas Steelman

View attachment 1745387View attachment 1745388View attachment 1745389

I'll take one delrin and one stainless steel. PM for details.

 

[sdbob]

I will take 2 bag riders in delrin. Pm to follow

 

[TSteelman]

All PMs replied to.

Thanks everyone for the support.

I believe I am now sold out of delrin. Still have some aluminum and stainless steel available.

A few more pics of these on guns for anyone interested.

 

[shoot4fun]

I have at least 4 of these and about to install another soon.
I'll need one more, maybe two soon.
Thomas is easy to deal with and ships quickly.

 

[Eric Leonard]

So this is a direct replacement for the rudder on the Wheeler LRB?? And what exact bag would it take.
I’ve been wanting to add a little weight to the rear of my stock and this may be what I was looking for and didn’t know it

 

[TSteelman]

So this is a direct replacement for the rudder on the Wheeler LRB?? And what exact bag would it take.
I’ve been wanting to add a little weight to the rear of my stock and this may be what I was looking for and didn’t know it

Yessir it is. Several of the stocks in the above pictures are Wheeler LRBs. Most people use a Protektor Flat Top Dr. Bag with 2” ear spacing. I prefer cordura ear material and tall ears.

 

[shoot4fun]

Yessir it is. Several of the stocks in the above pictures are Wheeler LRBs. Most people use a Protektor Flat Top Dr. Bag with 2” ear spacing. I prefer cordura ear material and tall ears.

It may help folks decide which one they need if you have the weights for each different material.
I have found I could not sue more than the Delrin best for LG weight.

 

[TSteelman]

It may help folks decide which one they need if you have the weights for each different material.
I have found I could not sue more than the Delrin best for LG weight.

I have 3 materials available:

Delrin - approx. 0.5 lbs - $100
Aluminum - approx. 1 lbs - $100
Stainless Steel - approx. 3 lbs - $140

Approximate weights are embedded in original post.
I would say most light guns are using delrin, but if you can go aluminum, it’s putting weight in a good place. I have a wheeler light fill that makes weight easily with an aluminum 2” rudder.

 

[Eric Leonard]

Yessir it is. Several of the stocks in the above pictures are Wheeler LRBs. Most people use a Protektor Flat Top Dr. Bag with 2” ear spacing. I prefer cordura ear material and tall ears.

Ok I’ll take a stainless PM to follow

 

[pappaw]

Can't go wrong with these

 

[Webb5X]

Shooters if you're going to use a 2” adjustble rudder buy the original “Steelman Rudder”. They are top notch equipment, each one is inspected to be of the best quality possible. No dings, scratches or flaws of any kind. Every stock I make that my customers requests an adjustable 2” rudder will 100% have a TSteelman rudder on it.

 

[bugman]

Pm sent

 

[pappaw]

TTT

 

[Bob Longo]

PM sent