The time has come to free up some space on the gun wall, so I need to move some stuff that isn't getting shot as much.
There isn't alot of places here in PA to shoot ELR and I haven't come across any good spots so i've been focusing more on benchrest stuff, so it's gotta go.
This rifle was built by Kevin Cram himself as his personal long range elk hammer circa 2011. It's killed countless amounts of elk, deer, etc at long range. Some even around a mile.
I bought it off him in 2019 and put less than 75 rounds through it. Total round count less than 400.
the gun will do 3,200ish fps with h50bmg and 3,300 with 20n29 with ease. I was able to print sub 1/2 moa easy when doing initial fireforming around 3,000 fps.
338-408 cheytac
Lawton 8500 single shot action
1.350" heavy varmint 34" brux 10 twist barrel w/ montour county muzzle brake
Mcmillan a5 supermag stock w/ rear butt hook filled in and custom paint job
custom 30 moa rail machined by kevin
accutac picatinny rail (see gun wall)
nightforce 34mm ultralight low rings
SOLD
will include 49 pieces of brass (24 new / 25 2x fired) of peterson 375 brass, neil jones seater/sizing die with neck down bushings, 100-150 300 grain sierra matchking bullets, and a modified brass for hornady tool.
also have 2 more cases of 375 peterson brass and powder available to buyer.
nightforce ATACR 7-35 MOAR F2 scope can be included for an additional $2,250
kevin still has the reamer for this with reamer print available
located in central/east PA.
There isn't alot of places here in PA to shoot ELR and I haven't come across any good spots so i've been focusing more on benchrest stuff, so it's gotta go.
This rifle was built by Kevin Cram himself as his personal long range elk hammer circa 2011. It's killed countless amounts of elk, deer, etc at long range. Some even around a mile.
I bought it off him in 2019 and put less than 75 rounds through it. Total round count less than 400.
the gun will do 3,200ish fps with h50bmg and 3,300 with 20n29 with ease. I was able to print sub 1/2 moa easy when doing initial fireforming around 3,000 fps.
338-408 cheytac
Lawton 8500 single shot action
1.350" heavy varmint 34" brux 10 twist barrel w/ montour county muzzle brake
Mcmillan a5 supermag stock w/ rear butt hook filled in and custom paint job
custom 30 moa rail machined by kevin
accutac picatinny rail (see gun wall)
nightforce 34mm ultralight low rings
SOLD
will include 49 pieces of brass (24 new / 25 2x fired) of peterson 375 brass, neil jones seater/sizing die with neck down bushings, 100-150 300 grain sierra matchking bullets, and a modified brass for hornady tool.
also have 2 more cases of 375 peterson brass and powder available to buyer.
nightforce ATACR 7-35 MOAR F2 scope can be included for an additional $2,250
kevin still has the reamer for this with reamer print available
located in central/east PA.
Attachments
Last edited:
