Slickest Paste in grease form?

[Nvreloader]

What is the slickest grease for use on bolt lugs and firing pin cams etc.

Tia,
Don

 

[Johnboy]

anything with WS2 or molly in it would be really slick I would think with WS2 coming in first

 

[jonbearman]

Get some grease and add about a 1/4 teaspoon of ws2 or moly to it and mix it up.I use FORD SPEC chasis grease which has molly in it and take about 3 ounces and add the powder to it and mix it up real good with a popsicle stick and you are set.

 

[BoydAllen]

I mixed a very small amount of HBN in a dab of STOS and it was pretty slick. I used it on my cocking piece and cam.

 

[Joe R]

I recently learned of this grease from the gunsmith that build my rifle. It is ideal for cocking pin cams . A little bit goes a long way, and it lasts and lasts. Notice that it is for high temperature and extreme pressure, perfect for a bolt. It is very tacky. I bought it at Walmart for $3.46. For the bolt lugs I use lithium grease because it is much easier to clean, but it probably would work as well or maybe better. It's just too tacky for my liking and it would make a mess in my gun case. YMMV.

 

[Old Navy]

Absolutely nothing wrong Shooters Choice in the handy syringe. Later!

 

[Syncrowave]

Rather than spend $$$$$ on the same thing repackaged with a bunch of gun-specific hogwash on the label, I just use a dab of moly wheel bearing grease from a $3/lb. tub from the auto parts store when I need it. Works great. Just don't get it on your clothes (or use a non-moly version).

 

[5spd]

Ive been using engine break in grease that comes in a tube. A small one I got in the late 70s is still being used, very tacky & slippery & costs less than any packaged "gun' greese.

 

[Changeling]

What everyone really needs is a lubricant that doesn't change viscosity in heat or cold.

I've seen grease that people put on parts in rifles that brought them to a stand still in really cold weather!

 

[jnyfeler]

I've seen grease that people put on parts in rifles that brought them to a stand still in really cold weather!

The cold weather brings ME to a stand still ;-).

Jeff

 

[flatlander]

NECO MolySlide - just like Brilcream - a little dab'll do ya.

 

[MFG_BOP]

I really like the blue goo from PMA:

http://www.pmatool.com/product_info.php?cPath=44_81&products_id=224

 

[mshelton]

Clay Spencer used to swear by nickel anti seize on cams and lugs, I don't know where it ranks on the slickness scale but it's always seemed to work well for me.

 

[Hunkyfish]

Waterproof Silicon trailer wheel bearing grease does wonders for Marlin & Tuna Reels & Cheap