Sizing ?

[Gman]

Should I neck size with my Wilson sizer/arbor press first, then bump the shoulder with my Redding body die, or bump the shoulder first, then neck size? This is for a 6mmBR,.271 neck) using Lapua brass.

 

[expiper]

Neither.....get a resize die that does it all in one step....like a Redding type "S" or equal.....much simpler and faster and better and easier on the brass....Roger

 

[Gman]

I can see how it is simpler by eliminating one step, but how is it easier on the brass?