Simple reloading tools that work

[garandman]

I wanted to share my good experience with the Lyman powder funnel.

1st off being aluminum / pot metal, no static charge forms and the powder kernel's go right down the funnel into the case with no hang up.

Also the funnel comes with interchangeable case neck dimension inserts so you get no powder loss outside the case neck.

Funnel is also Is less likely to stick to case neck and pull it out of your loading block spilling powder all over the place.

Happy shooting !

 

[darkangel_r2]

Love mine too.

A good set of check weights is also a nice item.

 

[TheSnake]

Nice - that beats my 5 separate aluminum funnels.

 

[jcm800]

Mine would be a Lee powder measure stand. Works with any 7/8" measure. Heavy, stable, and portable.

 

[mdram]

really like my lyman funnel set
the rcbs universal hand primer is another simple item i like using
no shell holders, heck i now have 2, 1 stays set for small primer, one for large

 

[Lefty Trigger]

The Lyman powder funnel gets even better if you cut the handle off. Mine was so lop-sided it would lean over and allow ball powders to leak past the neck and end up in my loading tray.

 

[JFrank]

Simple reloading tool

 

[Bojo]

K&M primer pocket uniformer
pandora radio.
half full glass of ice cold Bulliet Rye.

 

[choprzrul]

I really like my simple little Sinclair arbor press coupled with Wilson chamber type seating die for use at the range. Doing load development took a giant step forward for me with this combo. No more 20 miles each way to the range just to load a few rounds.

My hunting rifle, a Browning 30-06, load development was 17 rounds start to finish. 5 shots at 0.68" with the last 4 loaded at the shooting bench.

 

[Lefty Trigger]

Simple reloading tool

Yep, I have a high dollar A&D electronic scale but keep my good-ole beam scale on hand. It never let me down but I fell victim to the "faster" thing.

 

[Bojo]

Yep, I have a high dollar A&D electronic scale but keep my good-ole beam scale on hand. It never let me down but I fell victim to the "faster" thing.

I’m very new to the fx120 with the V3. So far I think it will be a Major time saver , it’s like switching from an old 8n to a 4wd hydro tractor.

 

[Liven The Dream]

MEC Marksman Single Stage Reloading Press​

21st Century Priming Tool

 

[M-61]

Stamped: Made for RCBS by L.E. Wilson
Been with me from day one. Still works just fine.

 

[INTJ]

Simple reloading tool

Yes, and way more accurate than any of the electronic scales until we get to the A&D.....

 

[Lefty Trigger]

MEC Marksman Single Stage Reloading Press​

21st Century Priming Tool

I reload on a Mec and it's the smoothest press I have run in the price point for single stage presses.

 

[M-61]

Small primer pocket cleaner. Works perfectly. At least 35 years old. No name, no identifying marks. NOT a 'crocagator'. May have been made me for me years ago. Just works so well I wish I had one in large primer size.

 

[358WCF]

A crocagator. I started out using old screwdrivers ground to fit, but got one of these one day. Still have it & it works just fine.

 

[klamathsteel]

A crocagator. I started out using old screwdrivers ground to fit, but got one of these one day. Still have it & it works just fine.

View attachment 1287859

I chuck mine up in a cordless drill. Works great.

 

[jimmymac]

Perfect chamfer every time.

 

[bobm]

Love 'em or hate 'em.