SIG Brass

[Paddyd]

Any opinions on this brass? I bought a bag for my 223R today and would like to hear if anyone has had any luck with it. As good/ better or worse than Hornady? Was very reasonably priced at $30 per 100.

 

[Dusty Stevens]

I use it in pistols. It seems to be very well made compared to other pistol brass.

 

[Walt Krafft]

It is very good brass. I am using 223, 22 250 in 6xc, 6.5 creed, 308, and 300wm. It has been very uniform. Best place to get it seems to be Sigs web store.

 

[TIMMY]

Very good brass. Used 200 pieces of 243 for two years probably 10-15 loadings
and never split a case and never had a loose primer pocket.

 

[thatguyshm]

I use the 22-250 brass for my 22-250AI. It forms very well, full form on first firing. I've found the brass to be very close to SAAMI specs, meaning the shoulder is in the correct place for AI forming, its not grossly undersized like you can find with other brands. Neck's are more uniform in thickness then other brands as well. I turn the necks and it is properly annealed, coming off in nice thick shavings. I turn to 0.013", so they are plenty thick also. Pockets are strong.

 

[sparkyv]

I use Starline in pistols with much satisfaction. Not used it in rifle. I can find much 223Rem brass people leave behind, and good LC stuff at that. Why purchase 223 brass, Paddyd?