show off your Bat!
- Thread starter Josh11
- Start date
Here is my Bruno Hummer PPC. This little BAT shoots like no other!!!! eggs in the 1's when i do my part. Lee
Flybuster
Is that a Robertson stock? Very nice!! I have a Big BAT B being barreled and placed in a shehane St-1000 at the moment. I Have a good friend that is a professional cabinet builder and he is going to spray the clear on the stock. The rifle should really look nice when it is all done. I bought a Robertson BRX stock for that little ppc in the pic above. I really like these stocks. I think they are a way better stock than the mcmillan. At least as far as finish goes! Nice stick!!!
MArkS I also like your rifle, looks dam good. I have tried to like the Tooley MBR stocks but they just dont feel good to me. I think they are a great design and mine tracks very well, i just cant get comfortable behind it. Looks very nice!! Lee
Flybuster
Is that a Robertson stock? Very nice!! I have a Big BAT B being barreled and placed in a shehane St-1000 at the moment. I Have a good friend that is a professional cabinet builder and he is going to spray the clear on the stock. The rifle should really look nice when it is all done. I bought a Robertson BRX stock for that little ppc in the pic above. I really like these stocks. I think they are a way better stock than the mcmillan. At least as far as finish goes! Nice stick!!!
MArkS I also like your rifle, looks dam good. I have tried to like the Tooley MBR stocks but they just dont feel good to me. I think they are a great design and mine tracks very well, i just cant get comfortable behind it. Looks very nice!! Lee
I've had my BAT s.n. 357 for four years now.
RB/RP fluted bolt, Jewell trigger, Robertson stock with all accessories, includes an action wrench and use it as a switch barrel. All the barrels are 26" PacNor with custom flutes. Includes 30mm BAT rings.
Very smooth/sleek action with tight tolerances, not bulky and gorgeous to look at !
243Ackley 1:10 with 90gr. Lapua @ 3400 fps
20BR 1:11 with 40 gr Berger @ 3950 fps
20BR-40 Imp 1:9 with 50 gr Berger @ 3900 fps
RB/RP fluted bolt, Jewell trigger, Robertson stock with all accessories, includes an action wrench and use it as a switch barrel. All the barrels are 26" PacNor with custom flutes. Includes 30mm BAT rings.
Very smooth/sleek action with tight tolerances, not bulky and gorgeous to look at !
243Ackley 1:10 with 90gr. Lapua @ 3400 fps
20BR 1:11 with 40 gr Berger @ 3950 fps
20BR-40 Imp 1:9 with 50 gr Berger @ 3900 fps
skeetlee said:
Lee,
I was wondering if that was a Robertson you had also, I thought I recognized the finish. My stock is a Roberston GBF or Great Britain F-class design. I am extremely happy with the design of this stock. It has a railroaded fore-end too which is kind of cool. My next build will look sort of like CdnHotshot's rifle, but it will be African wood.
Very cool rifles guys, Tanner
Flybuster
I noticed the forearm on your stock, and thats what made me wonder. I really really like that design. Did you have to order it straight from Robertson or did you buy it from a retailer? Fill me in! Ya my shrek gun is a Robertson BRX, My little girl, (7 years old) named the rifle the shrek rifle. It has kinda stuck!! Thanks Lee
I noticed the forearm on your stock, and thats what made me wonder. I really really like that design. Did you have to order it straight from Robertson or did you buy it from a retailer? Fill me in! Ya my shrek gun is a Robertson BRX, My little girl, (7 years old) named the rifle the shrek rifle. It has kinda stuck!! Thanks Lee
LOL, Shrek good one! I guess I have to come up with something that funny for my rifle, since its so green.
I've had this gun for a couple of years, I ordered it directly from Ian Robertson in Canada. Tom Meridith did the inletting, and Dowling did the metal work. If I had to do it over again, I'd have the final finish applied after the inletting. Each of these gentlemen do superb work, very very meticulous. I have a picture of the forend upclose I can PM you that after supper.
I wanted the BAT 3 lug mainly because of the short bolt throw angle. I would be shooting prone and I wanted minimal movement in my position. I only really have to move my right hand to load, I can keep my left arm on the mat supporting my body and controlling the joystick. (why I didn't want a RL/LP for F-Class) I did my research and I am happy with that decision. I wanted a BR type action, since it would be shot in BR occasionally. Settled on a BAT, they are the best looking ones out there.
I've had this gun for a couple of years, I ordered it directly from Ian Robertson in Canada. Tom Meridith did the inletting, and Dowling did the metal work. If I had to do it over again, I'd have the final finish applied after the inletting. Each of these gentlemen do superb work, very very meticulous. I have a picture of the forend upclose I can PM you that after supper.
I wanted the BAT 3 lug mainly because of the short bolt throw angle. I would be shooting prone and I wanted minimal movement in my position. I only really have to move my right hand to load, I can keep my left arm on the mat supporting my body and controlling the joystick. (why I didn't want a RL/LP for F-Class) I did my research and I am happy with that decision. I wanted a BR type action, since it would be shot in BR occasionally. Settled on a BAT, they are the best looking ones out there.
TheBlueEyedBear
'The Nut Behind The Trigger'
MarkS
Silver $$ Contributor
Lee,
I have had a Shehane Tracker, two MBR, 2- Franklin 008,and the very first Lowrider. Richard built the lowrider for me when I shot my first IBS 600 yd record, and I shot 2 more with the lowrider. I like the stocks I can get a hold on, I can shoot free recoil. There are some about the lowrider I don't like. The knotch out rear stock. I would like a flat rear. Me Bat I got from a freind, it had a Lam fiddleback maple and walnut, but it had a narrow forearm, so I put the MBR on it.
Mark Schronce
I have had a Shehane Tracker, two MBR, 2- Franklin 008,and the very first Lowrider. Richard built the lowrider for me when I shot my first IBS 600 yd record, and I shot 2 more with the lowrider. I like the stocks I can get a hold on, I can shoot free recoil. There are some about the lowrider I don't like. The knotch out rear stock. I would like a flat rear. Me Bat I got from a freind, it had a Lam fiddleback maple and walnut, but it had a narrow forearm, so I put the MBR on it.
Mark Schronce
Bat Model B 1.55 RBLPRE, 6.5x47 Lapua
Bartlein 5R 1-8.5T 30'' Shadetree Tuner
TMBR Stock NF 12-42x56BR
Last group today at 600 yards in 20+mph switchy winds after I figured out the tuner and adjusted it at 300 yards. It held good vertical but I did not shoot fast enough and got burnt by the wind
Bartlein 5R 1-8.5T 30'' Shadetree Tuner
TMBR Stock NF 12-42x56BR
Last group today at 600 yards in 20+mph switchy winds after I figured out the tuner and adjusted it at 300 yards. It held good vertical but I did not shoot fast enough and got burnt by the wind
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.