Shots fired ! 6 Dasher: first 20 rounds

[garandman]

@Stan Taylor , here ya go.... I Checked case length on 3 different cases… the unfired all measured 1.687... the fired measured 1.703.. I've got the neck bushing's coming from Graf .... what do I do next ?

 

[Coyotefurharvester]

Can you partially seat a spent primer in a new piece of brass and chamber/close bolt and see if it measures close to the fire form comparator #'s. Tough to evaluate load/brass signs with +0.015 brass movement. Didn't see the wave in the neck carbon I like to see. All maybe fine once brass is sized properly for the chamber, barrel looks like it will shoot.

 

[Stan Taylor]

@Stan Taylor , here ya go.... I Checked case length on 3 different cases… the unfired all measured 1.687... the fired measured 1.703.. I've got the neck bushing's coming from Graf .... what do I do next ?

View attachment 1285221

When you get your bushings Set your die up so you only bump the shoulder one or 2 thousand and check them in chamber and go from there.

 

[4xforfun]

I didn't read all of the posts....but....is your chamber clean and dry? I don't know your cleaning regime, but always clean the oil/solvent out of the chamber after a cleaning.


Tod

 

[garandman]

I didn't read all of the posts....but....is your chamber clean and dry? I don't know your cleaning regime, but always clean the oil/solvent out of the chamber after a cleaning.


Tod

After the most recent range session I wiped and dried the chamber after Cleaning. That pretty much removed the heavy bolt lift.