Scope mount for Remington single shot

[ebb]

I have a very nice handy 22LR Remington built in the 1930s or 1940s. I want to add a scope, no one makes a rail, weaver makes weaver bases, but they look ridiculous they are so wide compared to the tiny receiver. My CZs have a dovetail that is much smaller, an 11mm but I think it is so close that 3/8s dovetail rings will work also. Are 3/8s or 11mm scope mounts made that I can drill and tap to mount on the Remington receiver, and use the same rings as the CZs? Thanks for looking!!!!

 

[CJ6]

There are makes of rings that can be used for either 3/8 or 11 mm simply by flipping the "claw".

 

[gkgeiger]

Check these out, may work.

3/8″ Dovetail Bases #8 Screws - Precision Quest Products

.5oz as a pair with screws and pins Torx Head Screws .265" from top of action to top of base Aluminum #8 Screws Compatible with 2500X/Trident Actions Center Pin to ensure it doesn't move

precisionqp.com

 

[ebb]

Thank you! That is what I am looking for, but I think that the holes in those bases may be too far apart for the tiny receiver. I will call or email them and see if I can buy them without holes or if I can buy a strip of the rail material. CJ6 I understand, and don't care which I use 3/8s or 11mm, I have 11mm rings and would buy 3/8s just need the rail. It seems everyone make a way to convert to Picatinny, but using the smaller dovetails is fast going away.