• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ruger American Predator magazine fail

hillbillydruggist

I just purchased an American Predator in 6mm Creedmoor, I have fired 2 shots. I removed the magazine and a small spring and a small plastic piece popped out! what gives? does anyone know how to reassemble, or where I can get a high quality magazine? I am going to contact Ruger also.

thanks
 
Last edited:
The magazine is cheap for sure.
I picked up a spare at sportsmen's warehouse.
Should be 4 pieces to the mag 2 sides spring and follower.
You should be able to load the spring on the follower and snap back together.
Maybe put a drop of glue on locking tab locations.
 
The very reason I refuse to buy a factory rifle without a drop floorplate anymore. The higher end Savage rifles are decent. I haven't handled many dbm rifles that inspire confidence.

I'm sorry yours went south so quick.
 
I think Ruger is well aware the detachable magazine on the Ruger American Rifle is a very weak point on an otherwise pretty good design. They have released a new one that is an improvement on the original but it is supposed to be a 4 round capacity for the 308, 6.5CM family. The one I bought will not feed the top round in my 6.5 Creedmoor RAP with a B&C aftermarket stock. It feeds 3 rounds perfectly, however. One of the 2 original magazines I own also has trouble with 4 rounds but the other works fine with 4. Those of you contemplating buying a Ruger American Center Fire Rifle should be forewarned the magazine is a potential problem and new ones are not cheep.
 
Bc'z said:
The magazine is cheap for sure.
I picked up a spare at sportsmen's warehouse.
Should be 4 pieces to the mag 2 sides spring and follower.
You should be able to load the spring on the follower and snap back together.
Maybe put a drop of glue on locking tab locations.
Click to expand...
it couldn't have been another part of the gun could it? it just looks like a little black plastic tab came off and a little spring. I just assumed that it was the magazine
 
There is an aftermarket tab and spring that replaces the plastic one the factory magazine. I replaced mine as a preventative item. I think it was like $14. I'll try to find where I thought it from later today.
 
I have a Ruger American Predator in 6.5 Creedmoor with that junk rotary magazine. I read somewhere that the 450 bushmaster mag will work so I bought one and it does work better. It holds one less round but it is more like a traditional mag not rotary.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,807
Messages
2,203,664
Members
79,130
Latest member
Jsawyer09

Share This Page

Back
Top