Rimx Barrel

[rjstubbl]

Where’s the best place to get a prefit barrel for a rimx? Would like to find one in stock.

 

[Rob01]

Check with Patriot Valley Arms. They make 16 and 12 twists barrels for RimX.

 

[DirtySteve]

Lothar Walther would be a good place to look..

Zermatt Arms RimX Pre-Fit

www.lothar-walther.com

I would call to verify they are in stock..

 

[Csafisher]

Mike Manzella might have some. If not he might have some blanks available to chamber. I don’t think his wait times are too long.

Or check here

https://diprecision.com/rim-x-prefit-lother-walther/

 

[rjstubbl]

Mike Manzella might have some. If not he might have some blanks available to chamber. I don’t think his wait times are too long.

Or check here

https://diprecision.com/rim-x-prefit-lother-walther/

How would I get ahold of Mike?

 

[RReeves]

Radix Precision has a few Facebook posts of a couple of different barrels available.

 

[padom]

How would I get ahold of Mike?

Mike's RimX barrels are tack drivers and his attention to detail is top notch. Cant go wrong

I have Green Mountains, Bartleins, Kriegers, Shilen and ACE from Mike

(605) 824-8206

Home | Manzella Precision https://share.google/NuQkfKd2RMqfPaI8j

 

[Csafisher]

Ya Mike is pretty good to work with. He even sent me videos of him dialing the barrel in on his lathe.

 

[14Copperhead]

I’ve got a RIMX custom build that I intended to use for PRS style matches, but my knees and back prevent me from any gun yoga style matches. I’ve been thinking about parting out the rifle. My barrel is a Barlein SS 1:16 twist M24 profile at 20 inches. The barrel was done by John Scandale @ Keystone Accuracy with his custom chamber. If interested, I can post picks of groups shot with various ammo. I’m guessing fewer than 200 rounds through it and properly cleaned and maintained. Let me know if you’re interested.

 

[14Copperhead]

I’ve got a RIMX custom build that I intended to use for PRS style matches, but my knees and back prevent me from any gun yoga style matches. I’ve been thinking about parting out the rifle. My barrel is a Barlein SS 1:16 twist M24 profile at 20 inches. The barrel was done by John Scandale @ Keystone Accuracy with his custom chamber. If interested, I can post picks of groups shot with various ammo. I’m guessing fewer than 200 rounds through it and properly cleaned and maintained. Let me know if you’re interested.

I would also sell the barreled action if anyone else reading this post is interested…