What is the reasoning by 2 bushing stacked?
Removing the de-capping rod in a FL sizing die?
- Thread starter TrekUS
- Start date
Removing the knurled jam nut and decaping rod won't let the adjustment screw bottom out.
Stack 2 bushings or just let knurled jam nut float on top of bushing.
6BRA
Gold $$ Contributor
the knurled jam nut has also been questioned in squareness compared to bushings.
with a little or no rattle...if the top plate the bushing is pushing against as the case is being inserted isn't square, runout may be induced. the second bushing is just a spacer...a square spacer.
with a little or no rattle...if the top plate the bushing is pushing against as the case is being inserted isn't square, runout may be induced. the second bushing is just a spacer...a square spacer.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.