Rem 700 Extractor

[2000gtacoma]

Anyone know where I can find a Remington 700 extractor for 308 bolt face? Mine is the rivet less style. At least somewhere besides ebay at $75 a piece. I believe mine is damaged and flops around with little spring pressure. If I can't locate one at a reasonable price I am strongly considering sending the bolt to Chad at LRI fo m16 extractor and dual ejectors. Any thoughts?

 

[gdbleb]

Just bought some R700 small parts from https://www.gretanrifles.com
They are great.

 

[Dusty Stevens]

Get the mod done. Itll make it a better piece in the end.

 

[Walt Krafft]

Remove the extractor by carefully rotating it clockwise while lifting it out. Gently bend it wider and reinstall by reversing the proceedure. I have fixed a bunch by doing this. M16 extractor is a fix, dual ejectors is a waste.

 

[2000gtacoma]

Remove the extractor by carefully rotating it clockwise while lifting it out. Gently bend it wider and reinstall by reversing the proceedure. I have fixed a bunch by doing this. M16 extractor is a fix, dual ejectors is a waste.

I did try that actually. I bent the extractor outward. For the first 1 or 2 tries works great then its like the spring is gone and the extractor is all loose again.

 

[Bocephus]

Anyone know where I can find a Remington 700 extractor for 308 bolt face? Mine is the rivet less style. At least somewhere besides ebay at $75 a piece. I believe mine is damaged and flops around with little spring pressure. If I can't locate one at a reasonable price I am strongly considering sending the bolt to Chad at LRI fo m16 extractor and dual ejectors. Any thoughts?

I "might" have one stashed. Out and about awhile today, so give me a PM shout tomorrow if you haven't scored one.

 

[jdh47]

Although I like the m700 there are a lot of things that I think they could've improved and the extractor is the first one. I am aware of the three rings argument.

 

[Preacher]

Saw a new one looking through box's yesterday for something.
If you don't find one I'll look again..

 

[2000gtacoma]

Although I like the m700 there are a lot of things that I think they could've improved and the extractor is the first one. I am aware of the three rings argument.

Been reading about that a lot. I however do not try to run "hot" loads. I always stick to well known data. I realize though somethings things just happen.

 

[10XSHOOTER]

And while your at it. Have chad at LRI put in the side bolt release!

 

[2000gtacoma]

And while your at it. Have chad at LRI put in the side bolt release!

Unfortunately I won't be sending the action in on this.

 

[1911nut]

PT&G told me a while back they plan to do a run of Rem 700 extractors

Remington Extractor (STD) - Pacific Tool and Gauge

Remington Large Extractor (New Style) at Pacific Tool and Gauge

pacifictoolandgauge.com

 

[2000gtacoma]

Remove the extractor by carefully rotating it clockwise while lifting it out. Gently bend it wider and reinstall by reversing the proceedure. I have fixed a bunch by doing this. M16 extractor is a fix, dual ejectors is a waste.

Did all this again. I've removed and reinstalled this thing probably 20 times at this point. I hate to speak to early but I believe I have the issue fixed. Somehow there was a bur on the inside of the groove in the bolt not allowing the extractor to come back to position. Also found another bur on the extractor lip itself. Cleaned and polished these areas. Kicks the 458 socoms at 3 o clock every time. Still wouldn't mind having a couple replacement as I have several 700s.