Reloading Components in Stock -- Running Topic

[22vartarg]

4350

Hodgdon H4350 Smokeless Gun Powder

For magnums with light to moderate weight bullets, Hodgdon H4350 rifle powder can't be beat. Powder Valley offers the finest reloading powder on the market.

www.powdervalleyinc.com

Thanks…. Got 1 jug

 

[newbieshooter]

Its sold out at PV but usually when it hits one place, there are other retailers. I just picked some up at Brownells. Good day for powder today. Encouraging.

sometimes if you wait long enough, they pop back (after the countdown):

 

[MtnGlassman]

Brownells has 1lbs containers of H4350!!

Finally got some!! Thanks!

 

[Sebrock]

sometimes if you wait long enough, they pop back (after the countdown):

View attachment 1295508

View attachment 1295507

Yup - been trying for about 30 mins. Got some at Brownells anyways. I had one in my cart but it would not let me check out because it was unavailable. Will try for a little longer till my wife starts yelling at me to go to dinner. Lol. Regardless, so good to finally see this powder back.


Edit - ok now it says wait 20 mins. Im out. I'll take my 8lbs from Brownells bought in 4 2lbs orders - not as severe as gunbroker but not much better when you pay for shipping and hazmat 3 extra times.

Edit 2 - now officially out of stock at PV.

 

[Drolds72]

Thanks…. Got 1 jug

I would have grabbed another but my wife watched the alert come in, and knew I have enough for 2 barrels……

 

[buggz]

Is H- preferable over IMR- ?
Why?

 

[BeefyT11]

Is H- preferable over IMR- ?
Why?

More temp stability, and smaller kernels

 

[uplandguide]

CCI BR4s at Natchez

Natchez

www.natchezss.com

I appreciated this post. I reload for 222 Remington and was down to about 800 primers. Now have 5000 arriving tomorrow. I see they are 'out of stock'. Thanks again.

 

[Majday]

I appreciated this post. I reload for 222 Remington and was down to about 800 primers. Now have 5000 arriving tomorrow. I see they are 'out of stock'. Thanks again.

If you ever are out a place that has some

Winchester .222 Remington New Brass Cases (PRIMED) | RMR Bullets

These are brand new .222 Remington cases made by Winchester. They are primed with Winchester primers. We recommend running them through a sizer to get the necks uniform but if you do this make sure you take out the decapping pin. These are brand new .222 Remington cases made by Winchester. They...

www.rmrbullets.com

 

[uplandguide]

If you ever are out a place that has some

Winchester .222 Remington New Brass Cases (PRIMED) | RMR Bullets

These are brand new .222 Remington cases made by Winchester. They are primed with Winchester primers. We recommend running them through a sizer to get the necks uniform but if you do this make sure you take out the decapping pin. These are brand new .222 Remington cases made by Winchester. They...

www.rmrbullets.com

I'll check that out. Some of the neck walls on my cases have been resized to the point where some of them are getting too thin to trust. My last trip to the range resulted in a few with burn thru in the neck. Thanks for the lead, nearly impossible to fine new brass for the 222 anymore.

 

[Majday]

No problem. It is very difficult to find. It shows they have about 2k cases left. .35-40 per case. But like you said they do have them which is a huge bonus.

 

[nakneker]

I shoot 222 quite a bit, Lapua brass has been my favorite. Lapua is more expensive on the front side but you’ll get a lot more reloads from it than most brass, my experience is that is cheaper if you factor in the lifespan of the brass. Plus is just a pleasure to work with. Precision has some in stock.

Shop Rifle & Shotgun Reloading Supplies | Dies | Bullets | Hulls | Wads | Powder - Precision Reloading

Shop online for shotshell and metallic reloading supplies, shooting supplies, metallic presses, rifle reloading components, shotshell reloading components, shooting accessories, rifle reloading brass and Bullets.

www.precisionreloading.com

 

[uplandguide]

I shoot 222 quite a bit, Lapua brass has been my favorite. Lapua is more expensive on the front side but you’ll get a lot more reloads from it than most brass, my experience is that is cheaper if you factor in the lifespan of the brass. Plus is just a pleasure to work with. Precision has some in stock.

Shop Rifle & Shotgun Reloading Supplies | Dies | Bullets | Hulls | Wads | Powder - Precision Reloading

Shop online for shotshell and metallic reloading supplies, shooting supplies, metallic presses, rifle reloading components, shotshell reloading components, shooting accessories, rifle reloading brass and Bullets.

www.precisionreloading.com

Thanks for that link. I just ordered the Lapua cases, not a bad price. I grew up reloading with my dad, we loaded a lot of Norma brass back in the 60's and 70's. I reload for my 30-06 and am still using about 60 of the National Match cases he used to shoot in competition.

 

[nakneker]

Thanks for that link. I just ordered the Lapua cases, not a bad price. I grew up reloading with my dad, we loaded a lot of Norma brass back in the 60's and 70's. I reload for my 30-06 and am still using about 60 of the National Match cases he used to shoot in competition.

I think you’ll like that Lapua brass. enjoy!

 

[Torqdup86]

Varget and H4895 at Brownells

 

[dnellans]

Varget and H4895 at Brownells

$50/lb shipped buying 2lb of each max - but it helps get enough in stock for next season of shooting

 

[4xforfun]

Varget and H4895 at Brownells

Not a big fan of "limit 2" that is a lot of freight to pay for 2 lb's. Maybe limit 8 or 10.

 

[dnellans]

Not a big fan of "limit 2" that is a lot of freight to pay for 2 lb's. Maybe limit 8 or 10.

At least between the 2 it was 4lbs this time of good useable powder. I've passed when its only been 2lbs in the past.

 

[AzMandella]

Varget gone .

 

[Mulligan]

An hour later and they still have H-4895

Things are improving
CW