Reduce Scale Targets

[bscott]

I am looking for a source where I can get some reduce scale F-Class targets,100 to 200 yds). Can anybody help???????

 

[Kodiak99317]

Not a dead match, but the IBS and NBRSA Hunter class targets have 1/2 moa bulls and they would work very well for 100 & 200 yd practice sessions, I use them. You also get 6 bulls per sheet.

 

[js223]

Creedmoor Sports carries the MR-31 which is a simulation of 600yd slow prone,open sights) for 100 yds. The repair center includes all of the scoring rings so it's probably the way to go,less cost). The only F-Class targets they list are the actual distance ones,300,500,600,8/9/1000yd).
If you used it at 200yds, it'd be pretty close for F-Class. Alternatively, you could use it at 100yds and just call an X a 10, 10 a 9, 9 an 8, and so forth.
If you want to get really fancy, I guess you could draw a 3/8" circle with a protractor,see below why 3/8) in the center of the target to track X's at 100 yds even. The sight picture would be more like at the actual match,i.e. a black bull and white outside) than the Benchrest target, if you would prefer it that way.
I measured an MR-31 center and the X-ring is a little over 3/4". They are not exactly proportional to the MR-1,6" X-ring) and I've heard that is due to the bullet diameter cutting the ring factor.

 

[memilanuk]

You can get an 8.5x11" printable PDF of the MR-31 center mentioned above from a variety of places... one of which is the U.S. Palma teams web site.

Check here:

http://uspalma.com/Targets/targets.htm

The X/10 ring would be a little off due to scaling - the actual ring sizes are slightly less than a straight mathematical scale to account for less wind effect - so the X-ring on an MR31 is about 3/4 moa, not 1 moa. Still it'd give you something to work with.

I don't know if anyone is making actual 100-200yd F-Class centers? You can buy small quantities,i.e. < 100 ct) of 300yd MR63FC,300yd F-Class centers) @ pistoleer.com.

HTH,

Monte

 

[bscott]

Thanks guys!

 

[SooStan]

I think a 50 yd. small bore target might be real close to what you want for 100 yds.