RECOIL LUG .750

[ericskennard]

Any ideas where I can get a recoil lug for a .750 threaded barrel????????????

I am using a pretty heavy barrel on a Stiller X2500.

 

[mudduck]

The square tang of the 2500 was intended to be the recoil lug. Prob have to have a custom one made for the 3/4 tenon if you really want one. Possibly could use a bushing to size one down I guess

 

[Ggmac]

Any ideas where I can get a recoil lug for a .750 threaded barrel????????????

I am using a pretty heavy barrel on a Stiller X2500.

Numrich , made for 410 shotguns , will need to be surface ground . They also have unfinished lugs with a 3/4 hole .

 

[ericskennard]

Yes and it has a large rectangular cut out underneath to make a recoil lug in the bedding material. However with this rifle build I am trying to duplicate the feel of a client's F-Class open rifle. I will be using a Lilja barrel cut in a Heavy Varmit taper. This barrel will finish at 28" or 30". That is a lot of weight to put on the .750 barrel tenon.

Stick Stark at S&S built one for Mike Dana about 5 years ago. That rifle is a laser beam. We tried 9 different types of ammo in it and it shot all of them.

 

[ericskennard]

Still trying to come up with a source for barrel recoil lug that will fit on a .750 threaded tenon.

 

[hogpatrol]

Try Dave Kiff at PT&G.

 

[Dave L Kiff]

Try Dave Kiff at PT&G.

Any type, any size on sale through our Website and Store, Thanks for the info

 

[Tim s]

Still trying to come up with a source for barrel recoil lug that will fit on a .750 threaded tenon.

Not for nothing but you don't need, nor should you want a lug with that setup.

 

[HuskerP7M8]

Not for nothing but you don't need, nor should you want a lug with that setup.

Agree!

Landy

 

[Intell]

It's not needed, and will probably hurt accuracy vs help it. Most guys using 40x's remove them and don't replace them when they are rebarreled