rear aperture extension?
- Thread starter justme
- Start date
Stumpy1
Gold $$ Contributor
Depending on the thread (diameter and pitch), you could have an extension made at any machine shop.
If the thread is the same as modern rear sights (9.5mm x 1.0mm), you can use a rear aperture glare tube like this https://www.champchoice.com/mc-opti...gehmann-rear-sight-anti-glare-tube-25mm-55625
They come in several different lengths, and can be cut down to the length you need.
If your thread pitch and diameter are different, the same principle applies.
Hope this is useful,
Frank
If the thread is the same as modern rear sights (9.5mm x 1.0mm), you can use a rear aperture glare tube like this https://www.champchoice.com/mc-opti...gehmann-rear-sight-anti-glare-tube-25mm-55625
They come in several different lengths, and can be cut down to the length you need.
If your thread pitch and diameter are different, the same principle applies.
Hope this is useful,
Frank
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.