Dusty Stevens
Shiner
Chris harris has some videos of his sweet hardinge cnc conversion doing barrels.Haha I totally believe him, I just want to see it happen!
Chris harris has some videos of his sweet hardinge cnc conversion doing barrels.Haha I totally believe him, I just want to see it happen!
Ancient historyYes Dave I have seen you at Diggle on the odd occasion,had a chat with you,along with a few others who had questions for you.i also had a interesting conversation with you about (barrel break in procedures) at a shooting show in Stoneleigh.you was on a stand there with David Ryan it was the year 2000..yes along time ago,ahah.you've fitted a few barrels since then.ive done an odd one.i can remember it as if it was yesterday.its a small world.
Nice set up Chris has got there Dusty.Chris harris has some videos of his sweet hardinge cnc conversion doing barrels.
Yes a long time ago.Dave did you come over here and stalk deer in Scotland occasionally.Ancient history
What Dave is showing here is absolute "gold". If you don't learn from this you are kinda "missing the boat ". Thanks for sharing Dave!!Here's my setup. I want to feel everything. The tactile feedback is absolutely essential to doing consistent top shelf work.
Tailstock off a 6" Emco lathe cut down to fit in a toolholder. MT adapter as the pusher. Indicated in. Reamer floats. Programed to go to X axis alignment after rough drilling the chamber. Easy Peezy
Under the barrel is my first settling pond with magnets below the catch pan.. That alone gets 99% of the debris.
I'll add that if you start with a concentric hole, roughed in chamber, in the barrel it's hard to screw it up. Probably the only way would be to hold a reamer in a rigid setup. Everything will be oversize. I always had concerns about alignment. Radial we can dial them in. Axial alignment is another thing. I have two toolholders that have drill chucks on them. I can get the tool post very close for axial alignment but not perfect going from one to the other. The one I use to rough chambers with is the closest.
View attachment 1362683
If I remember there was a gentleman named Jeff Summers who shot at Diggle,he was very handy behind a rifle aswell if memory serves me correctly.i can't remember if he was a riflesmith aswell.
NIce lookin pile of barrels!Here's what I finished up this morning. There's a pic of my last settling tank before the oil goes into the coolant tank. There's a little sediment settling out but I haven't cleaned that tray out probably. 6 months. The outlet is on the right side with a magnet. I made a video of the last barrel. I just have to get off my phone.
View attachment 1362921
View attachment 1362920
Hes a great guy and has the resources to have the very nice stuff.Nice set up Chris has got there Dusty.
Now to cut them to length and thread the muzzles.NIce lookin pile of barrels!
I think it is butch pretty sure of it.he was an American gentleman.If it is the same Jeff Summers, he just entered the BR Hall of Fame.
Nice looking work Dave.Here's what I finished up this morning. There's a pic of my last settling tank before the oil goes into the coolant tank. There's a little sediment settling out but I haven't cleaned that tray out probably. 6 months. The outlet is on the right side with a magnet. I made a video of the last barrel. I just have to get off my phone.
View attachment 1362921
View attachment 1362920
You can't put a price on it Paul.there is no substitute for experience,year's of knowledge.we are blessed that the top guys on this forum share it with us..very much appreciated.What Dave is showing here is absolute "gold". If you don't learn from this you are kinda "missing the boat ". Thanks for sharing Dave!!
Paul
And a rigid setup...Here he is years later, much braver and with a multifix tool holder
Simple and rigidAnd a rigid setup...
Bruce Thom of BAT uses a rigid setup chambering at his home shop on a manual machine. There’s a good video of his shop and how he goes about it with his equipment.And a rigid setup...
yeah, you will be done by lunch...Now to cut them to length and thread the muzzles.