• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Question on bix andy trigger

fultonbig9

Gold $$ Contributor
I see they have 2 models of the competition style no safety but one has adjustable sear for 25 dollars more. Do i need that or not? This will be strictly for 600,1000 bench gun only. Joey edit, yes it is going on a bat b.
 
Last edited:
Copied from Bulletcentral website. Give them a call great people and a site sponsor see banner at top of page. I have three of them all without adjustable sear panda and borden actions

The upgraded sear insert installed into the top of the trigger allows for some minor trigger timing adjustments due to the fact that firing pin fall changes depending on the direction the insert is facing when installed. All triggers are set for standard centerfire benchrest applications. The second position however, is a favourite among the rimfire shooting community.
 
On a Bat you will not be able to get close to the recommended pin fall without the adjustable sear or unless you have a Bat action that takes the different trigger hangers....... jim
 
johara1 said:
On a Bat you will not be able to get close to the recommended pin fall without the adjustable sear or unless you have a Bat action that takes the different trigger hangers....... jim
Click to expand...
yes, it is a new bat should have the different hangers. Joey
 
johara1 said:
On a Bat you will not be able to get close to the recommended pin fall without the adjustable sear or unless you have a Bat action that takes the different trigger hangers....... jim
Click to expand...

I'm running two of them on newer BAT actions without the adjustable sear and with the regular trigger hangers. Nothing else needed.
 
.230" pretty close to that on both. I was a little worried about it at first but they both worked out.
 
LRPV said:
.230" pretty close to that on both. I was a little worried about it at first but they both worked out.
Click to expand...


That is great on a bat b 1.5 round and a 1.4 multi flat they were down around a .200...... with the adj. sear it went to .225.... jim
 
I have a bunch of Bat firing pin assemblies old and new some with the rollers but nothing would work. i tried to get hangers with no holes ..even..... jim
 
With the firing pin assembky removed
I was thinking about screwing the cocking piece closers to the firing pin tip
Shortening the distance from tip to cocking ramp. wouldn't this increase pin fall?
 
Tim Singleton said:
With the firing pin assembky removed
I was thinking about screwing the cocking piece closers to the firing pin tip
Shortening the distance from tip to cocking ramp. wouldn't this increase pin fall?
Click to expand...


It will be out of time, but maybe the new ones will work ....... jim
 
That is where i was, but the one that has two position sear in the long position worked perfect.... i would get mine with the adjustment on the firing pin and it would turn a Bat from smooth into a clunker...... jim
 
You must log in or register to reply here.

Similar threads

Bix' n Andy trigger question
Replies
4
Views
1,252
knguyen
Bix n Andy on Bat MB
Replies
3
Views
1,039
Dusty Stevens
Dusty Stevens
Bix&Andy trigger
Replies
3
Views
1,137
Otis284

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,265
Messages
2,214,886
Members
79,496
Latest member
Bie

Share This Page

Back
Top