Q re Cleaning -- First 5" from Chamber

[JMayo]

I've found seafoam to be hard to slide through the barrel. It squeaks !
I add a drop of kroil to each side of the patch.
I like it fine. Soak on the ride home & sometimes for a day. I Push that out when i begin to really clean it.
I'll soak the chamber end with a really wet patch, (the rod is sticking out) while i do brass work.

 

[GetReal]

This?

 

[divingin]

Hoe do you "rinse" the bore mop???

I don't mop, but on the occasions when I use a bronze brush (generally with C4 - I try not to expose the brush to Cu2+), I rinse it by running tap water over it for a minute or so. It seems to extend the life of the brush by at least 2x. I dry it by whacking it against a dry handheld paper towel to get most of the water out; what's left doesn't seem to affect anything (no corrosion or anything.)

 

[swd]

This?

View attachment 1481796

This is the one I use but that might work too

 

[GetReal]

This is the one I use but that might work too

There seems to be at least a half-dozen different formulations to the "SeaFoam" product.....

 

[cwebster]

That's a pretty good idea. Whatever works, right.

I see Free All penetrant mentioned on here quite a bit now. It works but boy that stuff seems to gum things up bad. It might be the culprit on some of the ones I've seen, as it came into wide use around the same time and the end results are similar.. I made the mistake of putting some on a Mit micrometer a good while back and I still don't have it all out of there. It sticks! I might end up sending it in for a tune-up.

I have not had it happen but I believe you. Kroil will do the same thing. When it "turns" its like polymerized vegtable oil and it's darn near impossible to clean off.

 

[JMayo]

Creeping stuff will get in places i don't want it.
I want Stay in the barrel until i remove it.

 

[gunsandgunsmithing]

I have not had it happen but I believe you. Kroil will do the same thing. When it "turns" its like polymerized vegtable oil and it's darn near impossible to clean off.

I haven't figured out the commonality with guns belonging to different people but I suspect there is one because, as I said earlier, I've seen more gummed up triggers in the last 2-3 years than probably all other years combined in this business/game. There almost has to be a common denominator. I'm just not sure where it is, having not had the same problem on my own guns. It's harder to see the commonalities on other peoples' guns than on my own. Who knows....I may be all wet but there seems to be a correlation, somewhere with it. I agree with your description, though.

 

[DGP4]

Hoe do you "rinse" the bore mop???

Bore Tech is water soluble.

 

[6.5 forever]

I haven't figured out the commonality with guns belonging to different people but I suspect there is one because, as I said earlier, I've seen more gummed up triggers in the last 2-3 years than probably all other years combined in this business/game. There almost has to be a common denominator. I'm just not sure where it is, having not had the same problem on my own guns. It's harder to see the commonalities on other peoples' guns than on my own. Who knows....I may be all wet but there seems to be a correlation, somewhere with it. I agree with your description, though.

I believe the gummed up triggers are coming from excess solvent running down bore guides when the gun is tilted down during cleaning. Put a rag under the bore guide and you will see it.

 

[gunsandgunsmithing]

I believe the gummed up triggers are coming from excess solvent running down bore guides when the gun is tilted down during cleaning. Put a rag under the bore guide and you will see it.

Oh, I agree, but something else has changed, be it the solvents or how they are being used. I mean, we've used bore guides for ages along with cleaners that apparently either didn't get into the triggers or aren't as prone to cause issues. It could be the users as well, but it's multiples of those too. Lol!

 

[ricco1949]

My biggest concern with that is the possibility of cleaning fluid working it's way into the trigger, which I've seen more of in the last couple of years than all other years combined, it seems.

I use a bore guide to apply Wipe Out through the action....cork the guide end and the muzzle, and let it sit horizontal in a vice with a slight downward slope to the muzzle. There's little threat of fluid making it through the guide o-ring into the trigger with this set up.

 

[6.5 forever]

Agreed solvents won't work uphill. The problem comes from excess solvent overflowing the solvent port or from patch insertion running down.

 

[gunsandgunsmithing]

Agreed solvents won't work uphill. The problem comes from excess solvent overflowing the solvent port or from patch insertion running down.

I don't even use the solvent port, fwiw. I just put a couple or so drops on the patch while on the jag. Never cared much for the solvent ports...but that's just me. I agree though, it may very well be people dousing the patch carelessly and fluid ending up in all sorts of places it shouldn't be.

 

[6.5 forever]

It seems most solvent products instructions say to "saturate" the patch. More is always better....LOL.

 

[Field_2_Fork]

Everyone that I shoot short range BR with cleans that first section of the barrel with a soft nylon brush loaded up with a bit of Iosso, every cleaning - after every target.

 

[Andy Work]

Everyone that I shoot short range BR with cleans that first section of the barrel with a soft nylon brush loaded up with a bit of Iosso, every cleaning - after every target.

I used Iosso on a patch wrapped around a worn bronze brush to remove all of the black in the first 4" of my Savage 6br barrel a couple of times. After the Iosso treatment I used 3 Eliminator soaked patches followed by Hoppes/bronze brush between groups, one fouler & five shots. 6 or 8 groups later the first few inches looked just as bad as before. I'm wondering how important it is to have the first few inches squeaky clean?

 

[jelenko]

I'm wondering how important it is to have the first few inches squeaky clean

What did the target say?

 

[Andy Work]

What did the target say?

That it doesn't matter and to quit wondering about it.

ETA: it doesn't matter in my factory Savage. Does it make a difference in a top level SRBR barrel?

 

[Field_2_Fork]

I dont have as much luck with that stuff as with a bronze brush.

We do bronze brush first, then work the first part of the barrel with Iosso.