Primer for 6x47 Lapua

[jwcrabb]

Guys. just wondering what primer you are using with the 6x47 Lapua? Thanks

 

[SDDasher]

CCI 450 Mag

 

[ShootDots]

Guys. just wondering what primer you are using with the 6x47 Lapua? Thanks

If you are using H4350 powder, try a Rem 7 1/2 BR....

 

[jwcrabb]

I'll be using Varget and 55g and 85g bullets. Mostly for Coyotes and Deer.

 

[cinch]

I run the Wolf/Tula Magnum primer in mine...

 

[MrMajestic]

I was running 450's with H4350 and recently switched to BR4's with no POI shift or change in accuracy.

 

[6brxdude]

I've tried quite a few different brands of primers in both my 6x47 Lapua's and have found the CCI 450 Mags worked best in SD and accuracy for me. I'm shooting a 9 and 10 twist .236 bore Kreiger's with Varget and Nosler 70grain BT's. These are my exclusive coyote guns


Kevin

 

[357Mag]

JW -

Howdy !

IN my 6mm wildcat ( case capacity in 6X47 - 6XC range ), I have had good results using
FED LR Magnum Match ( my guns... my loads ).

Bullet weights of 85 - 107gr


With regards,
357Mag

 

[tclaunch]

X2

Guys. just wondering what primer you are using with the 6x47 Lapua? Thanks

If you are using H4350 powder, try a Rem 7 1/2 BR....

 

[Yellow11]

CCI 450 mag, using RL17 and 115 DTAC

 

[offgrid]

CCI 400, Varget, 105 Hybrids has worked well in three 6x47 barrels for me.

 

[Jeffvn]

Wolf Magnums - H4350 in mine under either 108 BTs or DTACs.

JeffVN

 

[Josh11]

I use both rem 7.5 and cci 450 w no change on poi or loss of accuracy.

 

[Kjones9]

CCI 400, Varget, 105 Hybrids has worked well in three 6x47 barrels for me.

How much Varget are you using with the 105 hybrid?

 

[offgrid]

CCI 400, Varget, 105 Hybrids has worked well in three 6x47 barrels for me.

How much Varget are you using with the 105 hybrid?

start at 34.5. Started see pressure in my barrels 35.6-35.8, stiff bolt. Jumping the Hybrids .050 with a .104 FB.