RPR 6.5CM, yes same load same rifle. Bolt was Not sticky. load is: 41.0 grains of H4350. Thats 0.3 grains over the max in the Berger manual. Berger 140 VLD. CCI200 with Nosler brass cut to the suggested length in the Berger manual(1.910”). Chronoed then when it was 19*F it was 2595FPS average. It was about 36*F today I did not chrono them today.Where they shot with the same load? Per chance, did you chrono them? Appear to be starting to flatten but still rounded at the edges. no ejector prints. My humble opinion, shootum but keep an eye on the primers.
By the way, what is the load, gun?
Even with how stable H4350 is supposed to be? Should I back that down to the max of 40.7?Those are perfect. Wont be when it warms up but on that day they were good
Those are perfect. Wont be when it warms up but on that day they were good
Even with how stable H4350 is supposed to be? Should I back that down to the max of 40.7?
Even with how stable H4350 is supposed to be? Should I back that down to the max of 40.7?