jpattonr
Silver $$ Contributor
My grandfather is getting out of the shooting sports and is offloading quite a few items. From his workshop:
Fancy American Walnut smallbore silhouette stock. I do not recognize the receiver pattern in the bedding, so any help would be appreciated. It does not fit my Anschutz 54 or Winchester 52, however the 52 is close. He has shot a Walther KK in the past, but I have not been able to find the receiver specs list to compare it to what I have. Assuming most people are rebedding, it may not be an issue.
The receiver bedding is flat on the bottom, not radius. Aluminum trigger guard. Very lightweight, material has been removed where it's not necessary for maximizing the barreled receiver + scope weight. 5 round ammo holder forward of the bolt handle. Some measurements taken today:
Weight: 2lb, 2.8oz
Overall Length: 26.75"
Approx. Length of Pull: 12.5"
Forearm Width: 2"
Recoil Lug: .5" thick at the top, bevelled at the bottom
Receiver Width: 1.272" behind recoil lug
Receiver Screw Spacing: 6.5"
Barrel channel width at the top: 1.090"
Asking $225 shipped lower 48 only.






Fancy American Walnut smallbore silhouette stock. I do not recognize the receiver pattern in the bedding, so any help would be appreciated. It does not fit my Anschutz 54 or Winchester 52, however the 52 is close. He has shot a Walther KK in the past, but I have not been able to find the receiver specs list to compare it to what I have. Assuming most people are rebedding, it may not be an issue.
The receiver bedding is flat on the bottom, not radius. Aluminum trigger guard. Very lightweight, material has been removed where it's not necessary for maximizing the barreled receiver + scope weight. 5 round ammo holder forward of the bolt handle. Some measurements taken today:
Weight: 2lb, 2.8oz
Overall Length: 26.75"
Approx. Length of Pull: 12.5"
Forearm Width: 2"
Recoil Lug: .5" thick at the top, bevelled at the bottom
Receiver Width: 1.272" behind recoil lug
Receiver Screw Spacing: 6.5"
Barrel channel width at the top: 1.090"
Asking $225 shipped lower 48 only.






Last edited: