• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Powder for 6ARC

Had no problems resizing the Grendel. Would have to look back in the notes for times used. Have many cases to anneal and clean .

Have new Starline ARC Brass loaded for a range trip first of May. Leverevolution, CCI 400s, 110 A tips., approximately. 080 / .085 off lands, single round feeding.
 
Retired shooter said:
Had no problems resizing the Grendel. Would have to look back in the notes for times used. Have many cases to anneal and clean .

Have new Starline ARC Brass loaded for a range trip first of May. Leverevolution, CCI 400s, 110 A tips., approximately. 080 / .085 off lands, single round feeding.
Click to expand...

Will be interesting to see how they work compared to Hornady. I am in no way interested in resizing or forming brass.

I shot factory 108 ELDs in a match a few weeks ago and they did well but were slow at about 2710fps.
 
Rob01 said:
Oh and buy as much powder as you can afford as it's not going to get cheaper. ;)
Click to expand...
This purchase is just to explore what will work best and then I'll buy bulk.
I already have 8lb'ers of A2460, Benchmark and TAC that I have been using in my 223 loads. While the Benchmark and 2460 provide good loads they just are not as good as I am looking for.
 
Only reason I did the resizing was the lack of availability.
You are the first I have found using the heavier bullets, What changed the 108 velocity ? All the variables the same.?

What is maximum yardage you shoot in a match. I don’t shoot competition, only for fun.
 
KMW 1954 said:
This purchase is just to explore what will work best and then I'll buy bulk.
I already have 8lb'ers of A2460, Benchmark and TAC that I have been using in my 223 loads. While the Benchmark and 2460 provide good loads they just are not as good as I am looking for.
Click to expand...
Have you tried the old stand by H335?
 
Retired shooter said:
Only reason I did the resizing was the lack of availability.
You are the first I have found using the heavier bullets, What changed the 108 velocity ? All the variables the same.?

What is maximum yardage you shoot in a match. I don’t shoot competition, only for fun.
Click to expand...

I get that and why I have a bunch of the Hornady on hand.

The 108 were the factory loaded ammo. I didn't load them.

We shoot out to 1000-1200 yards depending on the match. It makes it no problem. I have shot them at my home range to 1000.
 
Reading all this I'm getting impatient. Powder is not expected until Monday afternoon.

Also one of the guys I shoot with has a open box of 105gr Scenar's he is not going to use and offered then to me for 1/2 price. So I can see I will be busy soon.
 
Rob01 said:
I get that and why I have a bunch of the Hornady on hand.

The 108 were the factory loaded ammo. I didn't load them.

We shoot out to 1000-1200 yards depending on the match. It makes it no problem. I have shot them at my home range to 1000.
Click to expand...
The last factory loads I shot were the 103s, they were about 2700 fps. I can tell that the factory brass is definitely softer than the Starline
 

6MM GRINCH Defeats entire Field of 6PPCs

The Grinch took the 2 Gun this weekend at St Louis Missouri. Greg King piloted his 6MM Grinch for the win! Conditions were fairly light on Saturday but were a bit rougher at 200 on Sunday! It's way too early to trumpet the demise of the 6PPC, however it looks like the Grinch can hold its own...
forum.accurateshooter.com

6mm Grinch

I am not up to speed on this case and would appreciate an education from our valued members. Parent case? Fireforming required? Case capacity? Boltface required? FL Die, custom or not? Picture comparison? Any info is certainly appreciated, Tim
forum.accurateshooter.com

6 Grinch Brass Forming ?

The 6 Grinch is looking very interesting. I am not that knowledgeable on the forming of Custom Brass. My Guess would be have a Barrel chambered for the 6 Grinch, get some Laupa 6.5 Grindel brass, reduce the neck size to 6mm and them load some up and shoot it in the new barrel to fireform it...
forum.accurateshooter.com

Grinch

Anyone still shooting the 6mm Grinch? Do they have enough ass to use a 8 twist with 105 class match bullets to score shoot out to 400-500 yds and be competitive , or are they best suited for a 10 or 12 twist and 80's?
forum.accurateshooter.com

I know an ARC and a Grinch are different

I bet most folks on this forum could extrapolate the data and find some gold in their mining.

CW
 
Mulligan said:

6MM GRINCH Defeats entire Field of 6PPCs

The Grinch took the 2 Gun this weekend at St Louis Missouri. Greg King piloted his 6MM Grinch for the win! Conditions were fairly light on Saturday but were a bit rougher at 200 on Sunday! It's way too early to trumpet the demise of the 6PPC, however it looks like the Grinch can hold its own...
forum.accurateshooter.com

6mm Grinch

I am not up to speed on this case and would appreciate an education from our valued members. Parent case? Fireforming required? Case capacity? Boltface required? FL Die, custom or not? Picture comparison? Any info is certainly appreciated, Tim
forum.accurateshooter.com

6 Grinch Brass Forming ?

The 6 Grinch is looking very interesting. I am not that knowledgeable on the forming of Custom Brass. My Guess would be have a Barrel chambered for the 6 Grinch, get some Laupa 6.5 Grindel brass, reduce the neck size to 6mm and them load some up and shoot it in the new barrel to fireform it...
forum.accurateshooter.com

Grinch

Anyone still shooting the 6mm Grinch? Do they have enough ass to use a 8 twist with 105 class match bullets to score shoot out to 400-500 yds and be competitive , or are they best suited for a 10 or 12 twist and 80's?
forum.accurateshooter.com

I know an ARC and a Grinch are different

I bet most folks on this forum could extrapolate the data and find some gold in their mining.

CW
Click to expand...
What's any of this got to do with the question asked? Not even related to the topic!
 
Curious question, does the 6 arc share a 223 bolt face diameter ?
 
Powder arrived today, 2lbs LVR, 1lb Varget. 1 box Berger 95gr..

Just finished sizing up 50pcs Hornady brass and after a short break will be at it sizing it.

Have load data from Hornady, Hodgdon and Berger for the 105gr bullet which I will load first. Thinking with the LVR.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,254
Messages
2,192,252
Members
78,784
Latest member
Vyrinn

Share This Page

Back
Top