Pet loads for the 204

[NDreloader]

I've been using 26grns of H4895 w/ 40grn VMax and Winchester SR Primers.
Case trimmed to 1.84" and OAL of 2.250" They are nail drivers in a Remington
R15 w/ timney trigger. I see others are going hotter but I'm on 5'th reload on some
of the Hornady cases.

 

[JSH]

Almost a 10 year old thread. That was about the time I got my first 204.
The have found it oddly enough a pretty forgiving round and not picky at all to get MOA or better with a large variety of components.
I though I found the holy grail with 10x, then that load started having primer issues. Have some test loads worked up waiting on good weather.

 

[Fern]

Man been trying to find some sbk for a while but no luck. Only place I found them were over priced and high shipping.
I have 40g vmax and cfe223 that I’m going to see if I can find a load for my cz Kevlar

 

[JB10]

Hornady brass, 35gr bergers, 28.0gr of H4895. Just over 3,800fps from a 22in barrel 2.260 coal