part 4 bullet and powder in 300 wsm 600/1000 br

[rsmithsr50]

so we sort of covered part of this but I saw answers I was surprised to see.
one: what bullet..mast were 215 but I saw some 210 and one at 230.
I was leaning to the 215 comments ?

powder. I "thought" h4350 was the go to powder. again comments number crunching it seemed slow. how about some real life data

 

[dkhunt14]

so we sort of covered part of this but I saw answers I was surprised to see.
one: what bullet..mast were 215 but I saw some 210 and one at 230.
I was leaning to the 215 comments ?

powder. I "thought" h4350 was the go to powder. again comments number crunching it seemed slow. how about some real life data

RELOADER 23 and H4831SC work with the 215. The H4350 works great with the 210. As far as loads goes that all depends on barrel, freebore and twist. Most competitors are within a grain of each other. Matt

 

[Mulligan]

RELOADER 23 and H4831SC work with the 215. The H4350 works great with the 210. As far as loads goes that all depends on barrel, freebore and twist. Most competitors are within a grain of each other. Matt

Matt, have you tried RL16 with the 210’s?
CW

 

[dkhunt14]

Matt, have you tried RL16 with the 210’s?
CW

No. I have had such good luck with H4350, i never used another powder. Matt

 

[Mulligan]

No. I have had such good luck with H4350, i never used another powder. Matt

Thanks Matt.

I am currently working with H4350, just wondering.
CW

 

[Mike 243]

My 300wsm likes 61.5 gr H4350 with the 210 Bergers

 

[Mulligan]

My 300wsm likes 61.5 gr H4350 with the 210 Bergers

what velocity are you getting with that charge? Barrel length?

my barrel is new and speeding up..... 30" 62.3 is right at 2877 right now.
CW

 

[dogdude]

H-4350 62.5= 2857 in my 1-10'' 29.5'' Muller 5 groove.

 

[Mike 243]

what velocity are you getting with that charge? Barrel length?

my barrel is new and speeding up..... 30" 62.3 is right at 2877 right now.
CW

2845 with a 30" Kreiger barrel