Opinions on LT-30 for 6ppc 68 grain bullet

[Shooter13]

Been shooting LT 30 for a couple years,weekly in club matches, no registered matches, summer and winter. Several of us in fact have.
27.3 behind a 66 gr. 7-11 yields 3400+ in two barrels with no issue. Light neck tension.Temp and moisture don’t seem to impact it much
Going to 27.5 yielded harder bolt lift.
Seems to lay down a bit more carbon.

I'm at 27.5 of LT30 and it is the hardest kicking 6PPC I've ever shot!

 

[gunsandgunsmithing]

LT32 is a bit faster than 133, lt30 is too fast. They need an lt33

Blending powders isn't for everyone but the two LTs are identical and blend easily. I've toyed with it quite a bit, just attempting to optimize the burn rate for accuracy and capacity. I use quite a bit of what I can LT31.5. Works great and the fill rate is just right, in my case.

 

[Ccrider]

Blending powders isn't for everyone but the two LTs are identical and blend easily. I've toyed with it quite a bit, just attempting to optimize the burn rate for accuracy and capacity. I use quite a bit of what I can LT31.5. Works great and the fill rate is just right, in my case.

So you are blending .5 pound of 30 to a pound of 32? What bullet/fps are you getting with a full case?

 

[Dusty Stevens]

Blending powders isn't for everyone but the two LTs are identical and blend easily. I've toyed with it quite a bit, just attempting to optimize the burn rate for accuracy and capacity. I use quite a bit of what I can LT31.5. Works great and the fill rate is just right, in my case.

I just never mention that myself.

 

[jimmymac]

LT31 shows up on equipment lists pretty regularly.