• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Nosler 190gr ABLR

wboggs

Gold $$ Contributor
Finally got my hands on one of these bullets pulled from a loaded Nosler .300WSM round.
It had a cannelure rolled in it and was seated very deeply with a cartridge OAL of 2.81"
Here are the dimensions as best I could measure with the cannelure in place. OAL 1.46, Base to ogive 0.70, BT 0.26, Bearing surface 0.44, Nose 0.76 (all in inches). The boattail is long and has a sharp angle. To me, it looks like it most closely resembles a Berger 210 VLD but has a longer, sharper BT and a shorter bearing surface. Nosler lists the BC as 0.64. I don't have any to reload as I can not find any in stock.
Members comments on reloading with the long sharp boattail and design characteristics?
Bill
 
I have been wanting to try some of these :P

You have to pay close attention to seating depth I am told.
 
They were seated very deep in The factory WSM. Almost the entire base to ogive was seated in the case. There must be a pretty big jump to the rifling.
Bill
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,821
Messages
2,223,699
Members
79,910
Latest member
Kenhughes94
Back
Top