Norma 6mm Dasher Brass

[William Micah Hudgins]

Just curious if i can size Norma 6 Dasher brass to make standard 6br.

 

[timeout]

Just curious if i can size Norma 6 Dasher brass to make standard 6br.

TTT. I think not but waiting for other opinions.

 

[3dogs]

Not really, shoulder is .100 forward from standard br and is 40 degrees
Jim

 

[ckaberna]

If the dasher is made from 6br why could it not be sized back? Just learning all of this and curious.

 

[Dusty Stevens]

I used to make 6ppc brass from 7.62x39 brass. Talk about a sorting nightmare. Shortages used to really suck- yall aint seen nothin like that in many years and hopefully will never again

 

[William Micah Hudgins]

Well i guess i could order a box of 25 and give it a shot.

 

[Dusty Stevens]

Get one of pbike’s case forming dies and you can make whatever you want

 

[CaptainMal]

Just had a guy visit to ask about the BRA. He had some BR cases he messed up. I had a couple BRA ones I ruined turning necks. Took one, put it into a BR sizing die and out came a BR case with 30 degree shoulder. Easy too. Now that's not a Dasher to BR but only the shoulder angle with the same neck length.

No. I did not measure to see if it was good. Also never tried a Dasher to BR. Try and see if it works.

 

[William Micah Hudgins]

I think im going to give it a shot. Ill keep everyone updated.

 

[KMart]

Get one of pbike’s case forming dies and you can make whatever you want

I will go with Dusty on this one. Every time I have tried to shorten a 30 or 40* shoulder through normal means, I come out with a farkled up piece of junk.

Pbike's case forming die makes any case forming very easy.

 

[Curmudgeon]

Why?

 

[William Micah Hudgins]

Cant find 6br brass.