• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Newbie?

I am thinking about getting a blaser 93 in 6mmbr norma. Since there is not much factory fodder out there I guess I will have to dust off my reloading bench. My question is what dies do I need, don't see any that say norma just 6mmbr? If I get the ones for 6mmbr is there anything special that has to be done when sizing - dosen't the 6mmbr have a shorter neck? And is it possible to load this round in a progressive press like a dillon with good results? Thanks Celt
 
Hi all you nead is a set of 6mm BR reloading dies the case length was changed years ago and the remington and other cases are the same lenght now. I would look at a set of Redding dies and a type S Bushing full lenght die. if you use a dillon press you will get acceptable results under moa. We must remember the Lapua factory ammo that shoots so well is loaded on a progressive press. I have loaded verry accurate ammo on the dillon 650 and 1050 just make sure you have the spring return on your powder thrower if you have the new one you nead to modify it like the old model as you will get spilt powder with the new safety powder cam that stops double charges with pistol calibres. It just does not work well with rifle calibres.

Cheers Bill
Australia
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,517
Messages
2,197,827
Members
78,961
Latest member
Nicklm
Back
Top