• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Newbe looking for good dies

Hi everyone.

Was invited to shoot some F-Class (300&600yrd hunter class) this summer and want to step up my game.

I have been reloading for 3 years and have RCBS dies and a Hornady Concentricity tool (just got) and am usually under .75 MOA with my .270 Win.

I was having a question between the LEE COLLET DIES or the REDDING TYPE S BUSHING DIES. Which do you all prefer and which would be better for what I need?

Also, which neck turner would you use if any. I have and RCBS PRO TRIM manual and am not quite sure how to turn my case necks,or weather I even need to.

Thank you all for your info and help.

LR COYOTEKILLER
 
mtnman13 said:
... am usually under .75 MOA with my .270 Win.

I was having a question between the LEE COLLET DIES or the REDDING TYPE S BUSHING DIES. Which do you all prefer and which would be better for what I need?

Also, which neck turner would you use if any. I have and RCBS PRO TRIM manual and am not quite sure how to turn my case necks, or weather I even need to.

Turning and Trimming are two different operations.

The .270 is a hunting round. Standard dies will do just fine.

Here are the basics of turning if you ever go to a "tight neck" chamber or even a "minimum neck" chamber with a competitive round: http://riflemansjournal.blogspot.com/2009/12/reloading-neck-turning.html

It covers the WHY TO and HOW TO of neck turning.

I prefer the K&M Turner and the corresponding K&M Expandiron [Expander] for expanding necks to the proper size before turning. http://www.kmshooting.com/index.php

REGARDLESS OF MANUFACTURER, ALWAYS USE THE SAME COMPANY'S EXPANDER AND TURNER FOR OPTIMUM RESULTS.

Note: The expander that we're talking about is a separate tool from the expander ball found on the decapping rod in some dies. They are not substitutes for one another; the dimensions and physical characteristics are not the same.
 
I understand that turning and trimming are 2 operations. I have seen that RCBS makes a case neck turner to fit onto the TRIM PRO. Was curoius if anyone had used it.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,262
Messages
2,214,466
Members
79,479
Latest member
s138242
Back
Top