• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

New [to me] reloading bench

Hey, guys. I've had this setup for coming up on a year now. Haven't had the time to mess with it and I don't go shooting very often. Life gets in the way sometimes!

But my dad, mom, and I recently went to the range and fired some rounds and all three of us got to shoot some guns that have never been shot (ever) and got to shoot some that had never been shot by us (but have been shot before). So now all I can think about is guns! A month from now it'll be fishing. And a month after that will be cars. And a month after that will be woodworking. I have a bad habit of liking a lot of different things. :D

I've never reloaded any round in any caliber before, but I've watched over my uncles shoulder while he reloaded some 12ga shotgun shells....but I'll bet that's been ten years ago! But I think it's something I'd like to get into....or at least know how to do it since it is, after all, sitting in my garage!

Anyway, just thought I'd show off the setup. My granpda and uncle built the bench and all the gear belonged to my grandpa. He had some really, really nice stuff. Guess I got some of his genes because I like similar things. He was also very meticulous. So even though I don't know much (or anything) about reloading, I can't help but think this setup is pretty well complete. I know there are some dies that aren't here that I would need to reload certain calibers, but as far as the gist of having what's needed to get started is here, I do believe.

So what do ya'll think of my inheritance?? Better than money???? :cool:



IMG_4980.JPG IMG_4982.JPG IMG_4981.JPG IMG_4984.JPG
 

Attachments

  • IMG_4981.JPG
    IMG_4981.JPG
    324.9 KB · Views: 17
You have a good start on hand loading, if you decide to follow through. Of course you'll, "need" to buy more stuff. If you need ideas in the future of the things you will need, just ask us here. We are experts on spending money!
 
Hey, guys. I've had this setup for coming up on a year now. Haven't had the time to mess with it and I don't go shooting very often. Life gets in the way sometimes!

But my dad, mom, and I recently went to the range and fired some rounds and all three of us got to shoot some guns that have never been shot (ever) and got to shoot some that had never been shot by us (but have been shot before). So now all I can think about is guns! A month from now it'll be fishing. And a month after that will be cars. And a month after that will be woodworking. I have a bad habit of liking a lot of different things. :D

I've never reloaded any round in any caliber before, but I've watched over my uncles shoulder while he reloaded some 12ga shotgun shells....but I'll bet that's been ten years ago! But I think it's something I'd like to get into....or at least know how to do it since it is, after all, sitting in my garage!

Anyway, just thought I'd show off the setup. My granpda and uncle built the bench and all the gear belonged to my grandpa. He had some really, really nice stuff. Guess I got some of his genes because I like similar things. He was also very meticulous. So even though I don't know much (or anything) about reloading, I can't help but think this setup is pretty well complete. I know there are some dies that aren't here that I would need to reload certain calibers, but as far as the gist of having what's needed to get started is here, I do believe.

So what do ya'll think of my inheritance?? Better than money???? :cool:



View attachment 1085503 View attachment 1085505 View attachment 1085507 View attachment 1085508
Hey
Your fishing poles are upside down and your rifle caddy is up on top without any room on your bench.
And your concrete is cracked all to hell..
Other than that,
Nice bench
Just messin :)
 
Looks like your grandfather left you setting pretty nice with that set up.
Now grab the reloading manual and start reading and get a good understanding of the process.
 
Hey, guys. I've had this setup for coming up on a year now. Haven't had the time to mess with it and I don't go shooting very often. Life gets in the way sometimes!

But my dad, mom, and I recently went to the range and fired some rounds and all three of us got to shoot some guns that have never been shot (ever) and got to shoot some that had never been shot by us (but have been shot before). So now all I can think about is guns! A month from now it'll be fishing. And a month after that will be cars. And a month after that will be woodworking. I have a bad habit of liking a lot of different things. :D

I've never reloaded any round in any caliber before, but I've watched over my uncles shoulder while he reloaded some 12ga shotgun shells....but I'll bet that's been ten years ago! But I think it's something I'd like to get into....or at least know how to do it since it is, after all, sitting in my garage!

Anyway, just thought I'd show off the setup. My granpda and uncle built the bench and all the gear belonged to my grandpa. He had some really, really nice stuff. Guess I got some of his genes because I like similar things. He was also very meticulous. So even though I don't know much (or anything) about reloading, I can't help but think this setup is pretty well complete. I know there are some dies that aren't here that I would need to reload certain calibers, but as far as the gist of having what's needed to get started is here, I do believe.

So what do ya'll think of my inheritance?? Better than money???? :cool:



View attachment 1085503 View attachment 1085505 View attachment 1085507 View attachment 1085508

Very nice setup! I used 2"x12" on my bench, and 5/4" finished plywood. The weight made it awesome. I am always adding something.

I hope everybody's "New Year" is starting off with a bang this year, mine is looking good, but I am not counting my blessings just yet!

Take Care,
Dennis
 
That’s a nice setup! Even better because of the history and better than money! Whet rifles are you shooting?:)
 
You need more books. For shotshell I like Lyman 5th. Edition Shotshell Handbook. For metallic cartridge I like Lyman 49th. Edition Reloading Handbook and Handloaders Guide by Stanley W. Trzoniec. Handloaders Guide might be hard to find but well worth the search. Speer also has good How To and recipes. Welcome to a fun and rewarding hobby.
 
For some reason I can't reply to this post.

Keeps saying, "The content you want to post is not allowed".

Anyone else have this problem?
 
An excellent acquisition. Reloading is a great hobby and a good way to learn morer about shooting! Enjoy.
 
So you have some GP 11 coming? or did you buy some PPU? You can’t reload the GP11 brass without a special tool, just so you know.
I have a K31 and it’s a shooter. Good luck with yours. They’re fun guns.:);)
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,265
Messages
2,215,468
Members
79,508
Latest member
Jsm4425
Back
Top