DShortt
Gold $$ Contributor
So I have an unfired Remington 700 with the crappy plastic factory stock. Barrel chambered in 6.5 Creedmoor. Bought it just for the action.
Decided to borescope the factory barrel today and saw something I'd never seen before. I've seen plenty of off-center throats, but never one where it's apparent that the reamer was running oblique in the throat/leade area. Either that, or the bore itself egg shaped. WoW.
I'd post pics but it'll just look like I'm moving the scope front to rear in the bore, but I wasn't.
Apparently there's no limit to the ways volume production can result in machining problems.
Decided to borescope the factory barrel today and saw something I'd never seen before. I've seen plenty of off-center throats, but never one where it's apparent that the reamer was running oblique in the throat/leade area. Either that, or the bore itself egg shaped. WoW.
I'd post pics but it'll just look like I'm moving the scope front to rear in the bore, but I wasn't.
Apparently there's no limit to the ways volume production can result in machining problems.