
-Darrell
I did not on these, but after loading these and measuring, its apparent that I will have to at least turn .001" off making it .002" off total. then I'll have about .004" neck clearance. I may have to go to a smaller busking though. I'm using a .268" now. I have an .267" available which will give me about .002" neck tension( rough guesstimate, because I don't have any way to measure it).
-Darrell
I did not on these, but after loading these and measuring, its apparent that I will have to at least turn .001" off making it .002" off total. then I'll have about .004" neck clearance. I may have to go to a smaller busking though. I'm using a .268" now. I have an .267" available which will give me about .002" neck tension( rough guesstimate, because I don't have any way to measure it).
-Darrell
Primer hole is not primer size. Lapua has perfect flash holes please dont drill thoseWhat is the difference between forming large primer brass and drilling out the primer hole in Lapua brass?