Need a new chamfer tool
- Thread starter bench
- Start date
I don't like any that i have ever tried.
That includes an ancient Herters, a Bair and 3 made by Wilson.
I think you could make a good one using a piloted neck turning tool like those sold by Marquart or K&M.
Set the shoulder of the pilot to give a minimum acceptable outside chamfer using a hand ground tool bit.
Severance Tool and many others make industrial tube end deburring and form tools.
A lot of guys use the 3 way case trimmer cutter heads. I have never tried those since they are so expensive.
https://www.forsterproducts.com/product/3-in-1-case-mouth-cutters/
http://rcbs.com/Products/Case-Preparation/Case-Trimming/Trim-Pro-3-Way-Cutter.aspx
That includes an ancient Herters, a Bair and 3 made by Wilson.
I think you could make a good one using a piloted neck turning tool like those sold by Marquart or K&M.
Set the shoulder of the pilot to give a minimum acceptable outside chamfer using a hand ground tool bit.
Severance Tool and many others make industrial tube end deburring and form tools.
A lot of guys use the 3 way case trimmer cutter heads. I have never tried those since they are so expensive.
https://www.forsterproducts.com/product/3-in-1-case-mouth-cutters/
http://rcbs.com/Products/Case-Preparation/Case-Trimming/Trim-Pro-3-Way-Cutter.aspx
Last edited:
I like the Lyman case prep multi tool:
https://www.amazon.com/dp/B004MCMCYE/?tag=accuratescom-20
For 20 bucks, I think it's a very solid buy since you get 6 different attachments: inside (VLD) and outside deburring attachments, small and large primer pocket reamers and cleaners, all of which will work in your RCBS case prep center. It has a knurled aluminum body which unscrews into 2 parts in case you ever want to use it by hand.
I haven't noticed any change in sharpness after over 1k rounds.
https://www.amazon.com/dp/B004MCMCYE/?tag=accuratescom-20
For 20 bucks, I think it's a very solid buy since you get 6 different attachments: inside (VLD) and outside deburring attachments, small and large primer pocket reamers and cleaners, all of which will work in your RCBS case prep center. It has a knurled aluminum body which unscrews into 2 parts in case you ever want to use it by hand.
I haven't noticed any change in sharpness after over 1k rounds.
Just Dave
Gold $$ Contributor
.
buy the Hornady tool,,
https://ads.midwayusa.com/product/6...case-prep-center-large-caliber-deburring-tool
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.