BigDMT
Does anyone know of a good smith who can install a M-16 style extractor on a Remington 700 Magnum bolt face?
My smith doesn't have the tooling to do it. Thanks
My smith doesn't have the tooling to do it. Thanks
Greg Tannel installs "mini" M16 extractors in Remington bolts. This is probably what you want. The standard M16 extractor is pretty big. [br]
http://www.gretanrifles.com/
http://www.gretanrifles.com/
Are you sure you want this modification? The factory extractor is a safer design, and quite a few smiths are reluctant (or even unwilling) to modify the bolt in this fashion... 8)
As to a gunsmith rec, although he's in ND (vs. you being in Montana?), this gent is stellar: http://www.straightshotgunsmithing.com/
As to a gunsmith rec, although he's in ND (vs. you being in Montana?), this gent is stellar: http://www.straightshotgunsmithing.com/
BigDMT
NateHaler,
Not quite sure how the extractor has anything to do with safety? Maybe you are talking about gas escaping from the boltface?
Doesn't really matter though because in an overpressure situation, the gas comes right back in your face with any Rem 700. Which is one thing I really hate about the 700. Ask me how I know that...
Rem 700 Factory extractor is much less reliable, that's for sure. If the factory extractor was any good, gunsmiths would have never come up with installation methods for a Sako extractor. And if there was nothing wrong with a Sako extractor, they wouldn't have come up with the idea for a M16 extractor
Sleepygator
I want the Large m16 extractor because this is being used on a magnum action in a 338-375 Ruger. So the bigger/tougher the extractor components, the better.
Thank you both very much for your input. I will look these gunsmiths up and see what they have to offer. Take care.
Not quite sure how the extractor has anything to do with safety? Maybe you are talking about gas escaping from the boltface?
Doesn't really matter though because in an overpressure situation, the gas comes right back in your face with any Rem 700. Which is one thing I really hate about the 700. Ask me how I know that...
Rem 700 Factory extractor is much less reliable, that's for sure. If the factory extractor was any good, gunsmiths would have never come up with installation methods for a Sako extractor. And if there was nothing wrong with a Sako extractor, they wouldn't have come up with the idea for a M16 extractor
Sleepygator
I want the Large m16 extractor because this is being used on a magnum action in a 338-375 Ruger. So the bigger/tougher the extractor components, the better.
Thank you both very much for your input. I will look these gunsmiths up and see what they have to offer. Take care.
BigDMT
Checked both of them out.
The North Dakota fella is $50 cheaper. Not to mention closer to me and has a very nice web site that really shows his level of high quality work. VERY NICE machining on everything he does. I will give him a call on Monday.
Thanks NateHaler. BigDMT
The North Dakota fella is $50 cheaper. Not to mention closer to me and has a very nice web site that really shows his level of high quality work. VERY NICE machining on everything he does. I will give him a call on Monday.
Thanks NateHaler. BigDMT
BigDMT
MTlager said:
Thanks Lonnie. I will do that.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.