Neck Tension Gauges

[wedgy]

I stumbled onto these while looking at primer pocket uniformers and thought it was a nice tool instead of having a bunch of pin gauges. It is basically a stepped pin gauge with 5 different diameters in .001" steps smaller than bullet diameter to check how much spring back your brass is giving(it will give you a general idea). I ordered the 7 gauge set that includes two handles and a case. Will see how it turns out but I think I will like it.
++I am not affiliated in any way and paid full price++ https://burstfireguns.com/collectio...sion-gauge-coming-soon?variant=42695778402479

 

[Someone online]

I got the same set. Works for it's intended purposes.

 

[Chaotik]

Forster also sells a similiar product:
https://www.forsterproducts.com/product/neck-tension-gage-ntg/

 

[rlporter507]

MATCH GRADE - Case Mouth and Neck Tension Gage 224 / 308

Match Case mouth gauge or gage for determining neck tension of 223, 5.56, 308, 30/06, etc. Match grade.

ballistictools.com

or you can use a pin gauge set.

 

[powderbrake]

On Amazon, a 1/16 to 1/4 pin gage set is around $50-60, and the 1/4 to 1/2 set is around $ 120 to 150.
While the OP's selection is perfect for checking the necks, and is cheaper, having a full set of pin gages is mighty handy.