Meplat Uniformers!

[Ogre6br]

HI
How do these things work and what advantage are they for a hunter V a target shooter??
Do they only work with one projectile in a calibre or are they designed to work with projectiles in a range of weights within a calibre??

Thanks
later
P

 

[Aussie_bob]

Ogre check this site out should explain it all to you.
http://www.davidtubb.com/tcom_images/reloading/bmu_one.html
I think you should batch your projectiles with a comparator before you do the tips.

 

[Wild_Bill]

If you use the Plastic tip bullets you dont have to worry about it you can use them on different bullets in the same calibre renge i use mine for target shooting and use it all the time youy could also uniform soft points and cut the lead tip off then use an adapter with a centre drill and hollow point them for leaver actions or take match bullets and trim a large amount off the tip to leave a large open hollow point that will open up easier and more reliable than a small hollow point.

If you get one you can buy more mill cutters with a 3/8 shank and some 3/8 shaft collers and set the different cutters for your diferent projectiles so you dont have to keep adjusting them.

Cheers Bill
Australia

 

[6Dasher]

Sinclair now makes their own meplat trimmers... very nifty looking too!

 

[dreever]

I don't own one, but if I were in the market for one I'd by the one Kevin Cram of Montour rifles makes. All stainless steel with no plastic parts like some of the others.

 

[montourrifles]

MONTOUR COUNTY RIFLES

MEPLAT UNIFORMING TOOL


YOUR COMPETITIONS SECRET IS OUT !!

Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient,B.C.) of any kind weight bullet. This is done by removing the uneveness of a bullets meplat.,the nose of bullet) By uniforming the meplat you are reducing the B.C. of that type of bullet by approximately 2%, which is equivalent of less than 1/4 minute of angle sight adjustment. However you are creating a more consistent projectile, bullet to bullet and shot to shot, thus creating smaller groups. Any inconsistencies in your ammunition are magnified at extended ranges, therefore this process will eliminate one more variable in extreme accuracy reloading.
Montour County Rifles Meplat Uniforming Tool is comprised of a 303 Stainless Steel body, precision machined from one piece, to exceptionally tight tolerances for absolute squareness and repeatability. Bullets are held by a taper, caliber specifically bored into the uniformers body, and then polished so as absolutely NO DAMAGE is done to your bullet. Positively no type of plastic is used, this helps avoid in the over all length variances commonly occuring with other types of uniformers that use plastic bodies and/or inserts that expand while holding the bullet.
What sets Montour County Rifles Meplat Uniforming Tool apart from the others is we are the first to utilize the secondary portion of meplat uniforming. When cutting the meplat small burrs are pushed inside of the hollow point portion of match bullets. By utilizing the center de-burring tool these burrs can now be removed and an even countersink left in their place. This will remove any and all inconsistencies in your bullets meplat.
The Montour County Rifles Meplat Uniforming Tool is currently being used by some of the top shooters around the world in 1,000 yard bench-rest, high power, F-class, long-range hunters and many other facets of shooting. If you are serious about minimizing you groups, and having more consistent shot to shot accuracy, especially at extended ranges, you simply cannot afford to skip this step.

Tools are $60.00 shipped to within the lower 48 of the United States.
Extra shipping charges apply to out country sales.
Payment and Orders can be sent to:

Montour County Rifles Available inthe following calibers:
C/O Kevin J. Cram .22 6mm
402 Lombard Ave. 6.5mm 7mm
Danville, PA 17821 .30 .338


e-mail montourcountyrifles@msn.com Phone ,570) 275 - 1698