manson reamer

[mikecockcroft]

Used my first Manson reamer this weekend. It did something I'm not used too. It cut on all flutes.
Last 4 reamers I used made by another company only cut on one flute.
Was so happy I called and ordered some of their other tooling.
Mike

 

[Dusty Stevens]

They are great reamers. Too bad they use a circlip for the pilot

 

[mikecockcroft]

I only lost one taking the bushing off. Took a little while to adapt some tools to get the right size and angle to get it off. Tried to do it in a gallon zip lock bag to contain the clip but my two hands and my sons two hands wouldn't all fit in the bag!!!!

 

[billlarson]

Used my first Manson reamer this weekend. It did something I'm not used too. It cut on all flutes.
Last 4 reamers I used made by another company only cut on one flute.
Was so happy I called and ordered some of their other tooling.
Mike

That comes from careful grinding..... if they don`t let the wheel spark out..... it`ll leave a flute high........ sometimes you can fix with careful stoning.....
bill

 

[ARshuter]

At the price of reamers you shouldn't have to stone the flutes to equal them out. After all ain't that what you pay for, professionalism.

 

[Puzzaz01]

Dave Manson is a great guy to deal with. If you have a tech question, Dave will get on the phone with you and give the answers. AAAAA+++++

 

[mikecockcroft]

I cant sharpen a knife on a stone, I would probably really mess up a reamer!!!!!

 

[dkhunt14]

Glad to hear it cut so good. Matt

 

[shortgrass]

We been tellin' ya' for 6 months that Dave Manson makes good tools,,,,,, JGS does, too!

 

[Dusty Stevens]

If manson used screws to hold the bushings on i would only buy his reamers. I have quite a few but prefer jgs. I started with them back before ptg and have been around the block. Just got 3 in last week from jgs and all 3 cut better than my best ptg ever did