Markhor
Silver $$ Contributor
I ran into a new issue in trying to load my 6ppc fire formed cases. I deprimed using the Wison neck die with a .264 bushing ( I have a .268 neck) I loaded a 68gr Berger. The seated bullet came out loose, I could press it in with finger pressure. I thought, let me try a tighter bushing. I tried a .263 bushing, the bullet was still loose. I went with a .262 bushing, still loose. I finally tried a .261 bushing, guess what, I could still push the bullet in with my fingers. The outside diameter of the loaded round is .266 measured with a mic. I am totally baffled!!! What is going on??
Boyd & Outdoorsman any thoughts?
Thanks,
Ed
Boyd & Outdoorsman any thoughts?
Thanks,
Ed