looking for reloading help 6mm ack

[gutshot101]

i have a 700 with shilen ultra match 24 inch barrel 1-11 twist..... im looking for the most accurate 75gr load you guys have found. any help is appreciated. if youd like to email instead of post you can find me at broselectric@hotmail.com. thanks in advance.

 

[vlcakc]

Check Gun Of The Week 42, Richard Franklin's 6AI. Vic

 

[LESLEY]

Try VV 150 start low and work up

 

[stosh]

68 bart load powder group
50 imr4831 0.62 3517
51 imr4831 0.74 3635
52 imr4831 0.45 3746
52 imr4831 0.6 3746
52 imr4831 0.65
54 h4831 0.2
54 h4831 0.5 3493
54 h4831 0.7 3528
54 h4831 1.4 3541
54 h4831 0.6 3603
50 h414 1.25


70 seirra load powder group
39 vvn150 0.14 3200
40 vvn150 0.48 3300
41 vvn150 0.26 3350
42 vvn150 0.6 3400
43 vvn150 0.93 3447
51 imr4831 0.7
52 imr4831 0.75
52 h4831 0.5
53 h4831 0.9
54 h4831 0.8
48 h414 0.75
49 h414 0.25
50 h414 1.1

75vmax load powder group
51 imr4831 0.8
52 imr4831 1.75 3884
53 imr4831
48 h414 0.75 3547
49 h414 1.2 3647
50 h414 0.3 3775
50 h414 1.1 3662
45 AA4064 3511
46 AA4064 0.37 3589
52 h4831sc 0.75 3529
53 h4831sc 1.2 3597
54 h4831sc 1 3671
53 h4831 0.75 3515
My AI shot the 68Barts and 70 Sierra's better than the vmax. These are loads for my gun not yours, you have to work up loads in your gun as the preasures may be different.
Also here is a web site I found very helpful. http://www.angelfire.com/sd/6mmackley/
I don't have my AI any longer,got tired of fire forming brass. I am building on in 6x47 Lapua.
Stosh