• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Just clear

Bc'z said:
My dad's in Augusta GA, spent a good bit growing up in Dunlap Tn. and with Zack just outta Richmond N.Carolina is an option.
I saw a sweet spread out of Harlan Ky. 126 mostly wooded acres a decent house shop and barn for 298 last nite.
Wouldn't need to worry about where I'd hunt with a pla e like that.
Click to expand...

Peerless work as always, Brett!

I’ll pop down from my County to help you with Food Plots at your Ranch near Harlan if you wish!
 
Bc'z said:
@Southwest Action Works TR based off of the SOD design for Nick Tubito.
Brian Blake Eminence action inlet and bedded by Alex Sitman chambered in 223. Hopefully it makes it home in time for Nick to get it tuned for BSWN.
Dennis Ray took this stock over the top when he made it, this thing is WILD!

Next is a Cerus walnut and quilted maple Fopen, rife is built by the infamous Zack Donovant of Old Dominion Custom Rifles for Gene Parish, 6.5-7 FCP that will be glued and screwed.
Both of these projects were a pleasure to work on for some really great guys.View attachment 1626077View attachment 1626078View attachment 1626079View attachment 1626080View attachment 1626081View attachment 1626082
Click to expand...
I absolutely LOVE THIS stock. The live edge is beautiful. The only change I would have made (and it is a very minor modification that I could certainly live without), would have been to put a slightly larger radius on “cheek rest” area. See below.
IMG_7015.jpegFor some reason it won’t let me attach the screen shot that I marked up.
Dave.
 
Dave M. said:
I absolutely LOVE THIS stock. The live edge is beautiful. The only change I would have made (and it is a very minor modification that I could certainly live without), would have been to put a slightly larger radius on “cheek rest” area. See below.
View attachment 1626199For some reason it won’t let me attach the screen shot that I marked up.
Dave.
Click to expand...
Thank you for the feed back I really appreciate it. I’ll play with the design some and see how it looks.
 
Dave M. said:
I absolutely LOVE THIS stock. The live edge is beautiful. The only change I would have made (and it is a very minor modification that I could certainly live without), would have been to put a slightly larger radius on “cheek rest” area. See below.
View attachment 1626199For some reason it won’t let me attach the screen shot that I marked up.
Dave.
Click to expand...
Its got a soft radius, your just picking up the CF line in the pictures, me not a photographer and I'm always pressed for time so I don't look at things the way everyone else does.
What i might suggest is getting ahold of D Ray and get you a stock, let's quit bullshitin and make something cool.
Not trying to sound snarky, just trying to get you behind something special, you know I got nuthin but love for ya !
 
Bc'z said:
@Southwest Action Works TR based off of the SOD design for Nick Tubito.
Brian Blake Eminence action inlet and bedded by Alex Sitman chambered in 223. Hopefully it makes it home in time for Nick to get it tuned for BSWN.
Dennis Ray took this stock over the top when he made it, this thing is WILD!

Next is a Cerus walnut and quilted maple Fopen, rife is built by the infamous Zack Donovant of Old Dominion Custom Rifles for Gene Parish, 6.5-7 FCP that will be glued and screwed.
Both of these projects were a pleasure to work on for some really great guys.View attachment 1626077View attachment 1626078View attachment 1626079View attachment 1626080View attachment 1626081View attachment 1626082
Click to expand...
those are cool HG— thanks for sharing with us.
 
Dave M. said:
I absolutely LOVE THIS stock. The live edge is beautiful. The only change I would have made (and it is a very minor modification that I could certainly live without), would have been to put a slightly larger radius on “cheek rest” area. See below.
View attachment 1626199For some reason it won’t let me attach the screen shot that I marked up.
Dave.
Click to expand...
sure its nicer to get your hand around but ive had cracks in that area. the deeper you make that cut the weaker the stock is there and thats a weak point anyway. im trying to figure ways to strengthen that area. ive got one where the stock almost cracked in half at that spot. i drilled a 1” hole through the wrist and filled it with devcon and stuck a piece of 3/8 steel allthread in it. holding so far but i wanna try to prevent that.!
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,245
Messages
2,215,366
Members
79,508
Latest member
Jsm4425

Share This Page

Back
Top