jewel trigger HELP!

[bobcat93]

 

[Minesweeper3433]

I received my Jewel from Midwayusa and it had had the safety bent in towards the trigger like something sat on it. Caused the same issue and all that it took to fix was just bending it back. The metal they make the safety bar out of is very flexible. Greatest trigger I have ever had and it's about time I remove it for cleaning.

 

[SierraEd]

I was installing my new jewel trigger today and I'm having problems. I tried contacting them but it was to late in the evening. I will try again tomorrow. But I was Wondering if anyone had this issue and how to fix it before I send it back to jewel.
I have a Remington 700 left hand bolt sps and I just got it back from the gun smith today. I removed the factory trigger and installed the jewel. As I performed a function test I noticed the safety hits the action and will not engage, also the bolt release takes excessive force to release the bolt. From what I can tell it seems as if the trigger sits a little high into the action. The bolt works just fine and the trigger releases perfect.
Any ideas? I have delt with jewel before and there stand up guys from what I have experienced in the past..maybe I just got a bad one ..or maybe its my action..not sure

I had the same issue on a CMP 40X This morning. Installed the Jewel trigger and the safety would not work on the factory wood stock. I simply opened up the stock about a 64th of an inch, on the side that houses the safety. It took a couple of attempts because I did not want to remove an excess amount of material but it seems to be working just fine. Thanks for the thread guys.