Want to build a new rifle on a TL3 action, mostly for steel shooting out to 1k yards. I currently have some 6BR reloading supplies (dies, bushings, and some other things.) If I were starting from scratch I think I would favor the 6GT since I can hit a higher velocity, use H4350 powder (I have a lot), and maybe it feeds more reliably. Seems like the GT should get me an extra 100 to 200 FPS faster than the BR. Thoughts?
Is 6GT worth the "upgrade" from 6BR?
- Thread starter cp255
- Start date
urbanrifleman
Site $$ Sponsor
Lots of overlap. It's almost gotten a bit silly. Or it's great. Depends on how one sees it. More choices.
A 6xc can do the same work while coasting and was designed to feed from a mag. Tubb has 6xc brass on sale for $59.
www.davidtubb.com
I've had a few people get the 6gt. Seems to shoot fine. I'm not sure it's the wild fire of awesomeness that the buzz would indicate. But it works. These things seem to go in waves of internet buzz.
Do I think a 6gt will outshoot a Dasher or 6bra? No. But I'll wait and see.
A 6xc can do the same work while coasting and was designed to feed from a mag. Tubb has 6xc brass on sale for $59.
6XC Peterson Brass w/large primer pocket (Per 100)
www.davidtubb.com
I've had a few people get the 6gt. Seems to shoot fine. I'm not sure it's the wild fire of awesomeness that the buzz would indicate. But it works. These things seem to go in waves of internet buzz.
Do I think a 6gt will outshoot a Dasher or 6bra? No. But I'll wait and see.
Last edited:
IME: The GT has less recoil than the XC.
The GT was also designed to feed from a mag.
urbanrifleman
Site $$ Sponsor
At the same velocity, the recoil would basically be the same. I use AR COMP in my 6xc. 34 grains with 108 Berger. That's 2940 FPS and has a very light recoil. Shoots single digit spreads and tiny groups.
ballisticdaddy
Gold $$ Contributor
I am running a 6GT using H4350 and Berger 108's with a mild load I am at 2,920 fps with single digit ES and SD and has similar recoil to my 6BR with almost 200 fps more velocity.
urbanrifleman
Site $$ Sponsor
What is a mild load?
ballisticdaddy
Gold $$ Contributor
38.1 grains of H4350 and have11 firings with GAP brass and primer pockets are still tight.
Edit: Factory ammo using the Hornady 109 is at the same speed out of two barrels that I have shot.
urbanrifleman
Site $$ Sponsor
My 6xc shoots that same velocity with 34 grains of AR COMP.
It takes 39.5 of R16 to hit that same node.
So like I said before there seems to be a lot of overlap
And my Wilson barrels are 26 in Long
Last edited:
ballisticdaddy
Gold $$ Contributor
Why not shoot the 115 DTAC as it was designed for the 6XC? I have a metric shit ton of H4350 and prefer the case being mostly filled. 34.0 grains in a 6XC case leaves a lot of room.
urbanrifleman
Site $$ Sponsor
I think case fill is way over rated. Performance is what matters.
I shoot the Barnes 112 also. Just because the 6xc was designed for the Dtac, doesn't mean it doesn't perform with lots of other bullets.
I have three freebores for 6xc. It does a lot more than shoot 115s. We are testing varmint bullets now.
The true question is how well can you shoot your discipline. If your a benchrest shooter with capabilities like Jack Neary you should shoot what the top shooter do. Same if you want to shoot f class like the top shooters. There's a reason for the caliber and setup. Now if your like myself and shoot 1/2 moa out to 600 and 3/4 at 1k on the best days. the 6gt is for you. I have a home built axis with a criterion 28'' barrel with a Jard trigger. Home built chassis that shoots 105 and 108 bergers with 33 to 34.5 gr of varget to the above standards. All loads exceed 2900fps which will buck the wind better. George and Tom made this with the KISS method in mind. MY2CENTS
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.