• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ingenuity sightings?

I was really hopeful.... Now it's turning toward resentment. The lack of ANY information after such a push. The betas seemed to work great so i do not understand the holdup.

I do not have any knowledge in the areas of production so i may be talking out of turn.
 
NTHIGPEN said:
I noticed the shipping estimate has been updated to 4th quarter of this year.
Click to expand...
That's actually for new orders, appears the web page hasn't been updated as word is those are into 2025 now.

Given the scale of the project I never really expected to see anything this year. It's not like he got 20 or even 50 orders. Large corps take years to roll stuff like this out at scale. We all just need to be patient.

Do we want it quick or right? I'll wait as long as it takes for done right.
 
We are getting much closer but still a couple months out for shipping first units most likely. As far as lack of information, had any one of you sent me an email you would have had an answer almost immediately. Do not search information on a forum that is not a part of my company. My customer service is impeccable if you actually reach out to me directly. Be prepared to answer the phone if you send an email at 9pm lol
Really guys, I know everyone is chomping at the bit and we are working our asses off to get it there. This has been a large endeavor going from a product that was almost entirely made in house to this which has multiple pieces made from around the globe. It has taken wayyy longer than I ever anticipated when we started but I promise the target is within range now and things are coming along. This is not my first rodeo in manufacturing, just first to deal with so many components from abroad. Again, this is why I did not take any ones money for the preorders. Please be patient a little longer. Paul
 
Thanks Paul !!!

yeah I quit e-mailing with questions because I didn't want to be a distraction. I just check your website for updates now and then, here is as close as I get to social media, no FB, X, ... for me.
 
IngenuityP said:
We are getting much closer but still a couple months out for shipping first units most likely. As far as lack of information, had any one of you sent me an email you would have had an answer almost immediately. Do not search information on a forum that is not a part of my company. My customer service is impeccable if you actually reach out to me directly. Be prepared to answer the phone if you send an email at 9pm lol
Really guys, I know everyone is chomping at the bit and we are working our asses off to get it there. This has been a large endeavor going from a product that was almost entirely made in house to this which has multiple pieces made from around the globe. It has taken wayyy longer than I ever anticipated when we started but I promise the target is within range now and things are coming along. This is not my first rodeo in manufacturing, just first to deal with so many components from abroad. Again, this is why I did not take any ones money for the preorders. Please be patient a little longer. Paul
Click to expand...
Thank you for the update, Paul.
 
Thanks for the update, Paul!
New launches are tough when you can’t control the variables! Kudos for good communication
 
IngenuityP said:
We are getting much closer but still a couple months out for shipping first units most likely. As far as lack of information, had any one of you sent me an email you would have had an answer almost immediately. Do not search information on a forum that is not a part of my company. My customer service is impeccable if you actually reach out to me directly. Be prepared to answer the phone if you send an email at 9pm lol
Really guys, I know everyone is chomping at the bit and we are working our asses off to get it there. This has been a large endeavor going from a product that was almost entirely made in house to this which has multiple pieces made from around the globe. It has taken wayyy longer than I ever anticipated when we started but I promise the target is within range now and things are coming along. This is not my first rodeo in manufacturing, just first to deal with so many components from abroad. Again, this is why I did not take any ones money for the preorders. Please be patient a little longer. Paul
Click to expand...
Thank you for the update. We live in a society of instant gratification and we need to chill out and be patient.
 
I ordered rather early. A couple weeks ago Paul told me he hoped to start shipping them in November.
Seems he is making most of the parts in his own shop and has just had some new machines installed.
EDIT:
Just went through my emails with Paul and found my order number. My order was placed in December 2023 so hopefully I'll get one in the initial shipment. I currently use a V3 that I switched from the McDonald trickler to the IP trickler two years ago. I have really enjoyed using it. It made my V3 faster and more accurate by a bunch!
 
Last edited:
shoot4fun said:
I ordered rather early. A couple weeks ago Paul told me he hoped to start shipping them in November.
Seems he is making most of the parts in his own shop and has just had some new machines installed.
EDIT:
Just went through my emails with Paul and found my order number. My order was placed in December 2023 so hopefully I'll get one in the initial shipment. I currently use a V3 that I switched from the McDonald trickler to the IP trickler two years ago. I have really enjoyed using it. It made my V3 faster and more accurate by a bunch!
Click to expand...

Hey Jerry, I think I might be right there with you pal
Order #26996 placed on 12/19/23.....any minute now, any minute :)
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,020
Messages
2,188,272
Members
78,646
Latest member
Kenney Elliott

Share This Page

Back
Top